Review
The Goodman 4-ton combo system represents the mainstream choice for cost-sensitive HVAC replacements. This upflow configuration pairs an 80% AFUE furnace with a 14 SEER air conditioner, positioning it squarely in the value-over-performance category. Goodman's established reputation for reliability makes this system a practical option for contractors and homeowners alike, particularly in markets where rebate programs offset the modest upfront investment.
The furnace generates 120,000 BTU heating output with single-stage operation and runs on standard 120V, 60Hz residential power. Cooling capacity hits 48,000 BTU with a scroll compressor and single-stage condenser, both proven technologies. The system operates at 74 dB, which is moderately loud but acceptable for basement or garage installations. Multi-speed PSC blower motor handles up to 2000 CFM, adapting to various ductwork scenarios without additional controllers.
Pros & Cons
Pros
- 80% AFUE furnace efficiency qualifies for many utility rebates and meets baseline federal standards
- 14 SEER cooling unit earns ENERGY STAR certification with 48,000 BTU capacity for proper 4-ton matching
- Scroll compressor design offers proven reliability with lower maintenance costs than alternatives
- Single-stage burner simplicity reduces operational complexity and service call frequency
- Multi-speed PSC blower motor provides flexibility for different ductwork configurations and airflow demands
- 10-year warranty with online registration provides reasonable protection at this price point
Cons
- 80% AFUE furnace significantly lags behind modern 95%+ high-efficiency models, costing more over 15+ years
- Single-stage cooling without variable capacity means continuous full-power operation, reducing comfort and efficiency in mild weather
- 74 dB noise level runs louder than many competitors, potentially noticeable in quiet homes or during off-peak hours
- Spec sheet contradictions (lists both 4-ton and 5-ton tonnage, R410A and R22 refrigerant options) create confusion about actual capacity
Who Should Buy
Best For
Budget-conscious homeowners replacing a failed system in moderate climates who can wait for utility rebates to offset upfront costs. Contractors stocking rental properties or multi-unit builds where lowest initial capital matters more than long-term operating expenses.
Consider Alternatives If
Anyone in very cold climates needing robust heating capacity, homeowners prioritizing whisper-quiet operation, or buyers in high-energy-cost regions where 95% AFUE models pay for themselves within 5-7 years.
Installation
Upflow/downflow flexibility simplifies placement options for basement or attic installations. The unit requires metal flue venting at the top, standard 3/8-inch liquid and 1 1/8-inch suction lines with 1/2-inch insulation on 50-foot coils included. Electrical needs fall between 26.4 and 45 amps, requiring standard residential breaker compatibility. A/coil configuration works with furnace integration, though matching evaporator coil ordering requires verification.
Warranty & Reliability
10-year parts coverage applies with online registration, which is standard industry protection. This compressor-and-parts coverage provides reasonable security against manufacturing defects but excludes labor costs. Homeowner registration is straightforward and advisable immediately upon installation. No extended warranty option listed, so plan for potential repairs after 10 years as covered period ends.
Specifications
| SKU | LS381183850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 48,000 |
| Heating BTU | 120,000 |
| Refrigerant | R410A or R22 |
| Electrical | 120 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 74 |
| Weight (in lbs) | 48.000000 |
| Feature | Spec |
| Product Features | Rebate Available |
| Energy Star | Yes |
| SEER1 (Efficiency) | 16 |
| Condenser Stages | Single Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 7/8" |
| Max Breaker Size | 45 amps |
| Min. Breaker Size | 26.4 amps |
| Tonnage | 5 Ton |
| Valve Type | Sweat |
| Height | 30" |
| Width | 24.5" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | Multi Speed - PSC |
| Maximum CFM | 2000 |
| Configuration | Upflow / Downflow |
| Flue Location | Top |
| Burner Stages | Single |
| Fuel Type | Gas |
| Liquid Line | 3/8" |
| Suction Line | 1 1/8" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 1/2" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.