Independent Review · Updated June 2026

4 Ton 14.5 SEER 92% AFUE 80,000 BTU Goodman Gas Furnace and Heat Pump System - Upflow

Energy Star 92% AFUE furnace paired with 14.5 SEER heat pump delivers solid year-round comfort

8.2
IndustrialRank Score
Efficiency
8.5
Reliability
7.8
Value
8.0
Installation
8.5
Warranty
8.0
4 Ton 14.5 SEER 92% AFUE 80,000 BTU Goodman Gas Furnace and Heat Pump System - Upflow
Current Price
$0
Check Price at HVACDirect → Shop Now at HVACDirect
Authorized dealer · Full manufacturer warranty
// Bottom Line
This Goodman combo system works best for homeowners in mixed climates who want a dependable all-season solution without premium pricing. The 92% AFUE furnace and 14.5 SEER cooler handle heating and cooling duties competently, making it ideal for moderate climate zones where neither extreme cold nor heat dominates.

Review

Goodman's 4-to-5 ton combo system represents a practical middle ground for contractors upgrading split systems or homeowners replacing failed units. This upflow configuration accepts R410A or R22 refrigerant and uses a scroll compressor, proven technology in thousands of installations nationwide. The system ships at 48 pounds and fits standard 21-by-21-by-30-inch equipment closets, making it a straightforward swap for many existing setups.

The furnace delivers 48,000 BTU of heating output at 92% AFUE efficiency, performing respectably for winter comfort without excessive gas consumption. Cooling capacity matches at 48,000 BTU with 14.5 SEER rating and Energy Star certification. The multi-speed blower motor provides flexibility, reaching 1600 CFM maximum, while the single-stage compressor and burner operate at full or idle rather than modulating between speeds. Total system requires 208 or 230 volt single-phase power and appropriate breaker sizing between 26.4 and 45 amps.

Pros & Cons

Pros

  • 92% AFUE efficiency meets Energy Star standards, reducing winter heating costs versus older units
  • 14.5 SEER cooling performance delivers reasonable summer efficiency for the price point
  • 5 ton capacity with 48,000 BTU heating and cooling covers most residential single-family homes
  • Multi-speed blower motor adjusts airflow from 0-1600 CFM for better comfort and zoning flexibility
  • PVC exhaust compatibility simplifies installation and reduces flue corrosion concerns
  • 10-year warranty with online registration provides solid peace of mind coverage

Cons

  • Single-stage burner and compressor lack modulation, running at full capacity or off rather than partial speeds
  • 74 dB decibel level registers as moderately loud, potentially noticeable in quiet living spaces
  • Spec sheet shows conflicting tonnage data (title states 4 ton, specs show 5 ton) creating confusion

Who Should Buy

Best For

Contractors and homeowners in moderate climates seeking straightforward gas furnace and heat pump combos with reliable mid-range efficiency. Budget-conscious buyers comfortable with single-stage operation who prioritize dependability over advanced modulation features will find good value here.

Consider Alternatives If

Anyone in extreme cold climates needing 95%+ AFUE should explore variable-stage models, and noise-sensitive buyers should audition 72 dB or quieter alternatives.

4 Ton 14.5 SEER 92% AFUE 80,000 BTU Goodman Gas Fu
$0
Buy at HVACDirect →

Installation

Installation requires basic HVAC skills and proper refrigerant handling certification. The upflow orientation accepts standard ductwork connections with A-coil evaporator configuration. PVC flue venting from the right-side exhaust simplifies routing away from the furnace. Pre-charged refrigerant lines ship up to 50 feet, reducing field work. Electrical connections demand adequate breaker capacity and proper line voltage supply.

Warranty & Reliability

Goodman backs this unit with a 10-year comprehensive warranty upon online registration, covering parts and compressor failure. Registration typically takes five minutes on their portal and protects your investment through the critical early-failure window. This duration matches competitor standards and provides reasonable coverage for residential applications.

Specifications

SKULS381183850
Brand/ManufacturerOnline Supply
Cooling BTU48,000
Heating BTU48,000
RefrigerantR410A or R22
Electrical208 / 230 V. 1 Phase 60 Hz
Warranty10 Years with Online Registration
Decibel Level (dBA)74
Weight (in lbs)48.000000
FeatureSpec
Airflow DirectionUpflow/Horizontal
Exhaust Flue RequirementPlastic / PVC
Furnace Efficiency / AFUE92%
Blower MotorMulti Speed
Maximum CFM1600
ConfigurationUpflow / Downflow
Flue LocationRight
Burner StagesSingle
Fuel TypeGas
Height30"
Width21"
Depth21"
ResourcesCAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Product FeaturesRebate Available
Energy StarYes
SEER1 (Efficiency)16
Condenser StagesSingle Stage
Compressor TypeScroll
Liquid Valve Size3/8"
Suction Valve Size7/8"
Max Breaker Size45 amps
Min. Breaker Size26.4 amps
Tonnage5 Ton
Valve TypeSweat
Liquid Line3/8"
Suction Line1 1/8"
StyleA-Coil
Suction Line Insulation Thickness1/2"
Length50 feet

Frequently Asked Questions

Does this furnace work with existing ductwork from my 15-year-old system? +
Yes, if your current ducts match the upflow configuration and accept 1600 CFM airflow. The multi-speed blower adjusts to existing ductwork restrictions. However, older ducts may have leaks, reducing efficiency gains. Have an HVAC contractor evaluate before purchasing to confirm compatibility and identify duct sealing needs.
What does the 92% AFUE rating actually mean for my heating bill? +
AFUE means 92 cents of every heating dollar heats your home while 8 cents escapes through the flue. Compared to 80% AFUE units, you save roughly 13% annually on gas costs. Actual savings depend on climate, insulation, thermostat settings, and local gas rates. In a cold region, savings could exceed $200-400 yearly.
Is single-stage operation a significant drawback compared to variable-speed models? +
Single-stage runs at full power or idle, consuming more gas during mild weather than modulating units. Two-stage systems reduce this inefficiency. However, at 92% AFUE and 14.5 SEER pricing, this remains a solid budget-conscious choice. Consider variable-stage if you live where heating or cooling seasons are extremely long.
Can I use this with my current R22 system or must I upgrade to R410A? +
This unit accepts both R22 and R410A refrigerant, providing flexibility if you own R22 equipment. R410A is now standard and R22 phasing out, so R410A operation is recommended for future servicing. Clarify refrigerant type with your installer before purchase to match your existing condenser.
Does online registration really matter for the 10-year warranty? +
Yes, registration is mandatory to activate the full 10-year coverage. Without it, warranty coverage drops significantly. Registration takes minutes on Goodman's website with your serial number and proof of purchase. Keep documentation and register immediately after installation.

Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.