Independent Review · Updated June 2026

Goodman 4 Ton 14 SEER 96% 80,000 BTU Furnace & AC System - R410A Upflow

High-efficiency 4-ton combo system with 96% furnace AFUE and Energy Star rating

8.2
IndustrialRank Score
Efficiency
8.5
Reliability
7.8
Value
8.0
Installation
8.5
Warranty
8.0
Goodman 4 Ton 14 SEER 96% 80,000 BTU Furnace & AC System - R410A Upflow
Current Price
$0
Check Price at HVACDirect → Shop Now at HVACDirect
Authorized dealer · Full manufacturer warranty
// Bottom Line
This 4-ton Goodman system works best for homeowners upgrading older equipment in cold climates where heating efficiency matters most. The 96% AFUE furnace and 16 SEER2 cooler deliver real energy savings, especially when you factor in available rebates.

Review

The Goodman 4-ton furnace and AC system positions itself as a practical, efficiency-focused choice for mid-range residential installations. This combo pairs a 96% AFUE gas furnace with an air conditioning condenser, both rated for R410A refrigerant. The unit carries a 10-year warranty with online registration and qualifies for Energy Star certification. At its price point, it competes well against similar Goodman offerings and entry-level systems from Carrier and Lennox. The upflow/horizontal configuration suits most standard home installations.

Performance specs tell a balanced story. The furnace delivers 48,000 BTU heating output at 96% efficiency, translating to measurable savings on winter heating bills. The AC side provides 48,000 BTU cooling capacity with a 16 SEER2 rating, which exceeds typical expectations for a 4-ton unit. The scroll compressor operates as single-stage, meaning it runs at full capacity or off, without modulation between levels. Airflow reaches 1600 CFM maximum with the multi-speed blower, providing flexibility for ductwork sizing. Electrical requirements are modest at 208/230V single-phase, 60Hz, with breaker sizing between 26.4 and 45 amps.

Pros & Cons

Pros

  • 96% AFUE furnace efficiency means minimal heat loss, saving significantly on winter gas bills
  • 16 SEER2 cooler rating exceeds the 4-ton specification, delivering stronger cooling performance than competitors
  • Energy Star certified across both heating and cooling components
  • Multi-speed blower motor adjusts airflow from 0-1600 CFM for better comfort and efficiency
  • PVC/plastic exhaust flue compatible with most modern home configurations, reducing retrofit costs

Cons

  • Single-stage burner and compressor lack modulation capability, cycling on and off rather than adjusting output smoothly
  • 74 dBA noise level is moderately loud, noticeable in quiet homes during peak heating or cooling cycles
  • Spec sheet lists conflicting tonnage (titled as 4-ton but specs show 5-ton capacity), creating confusion about actual system size

Who Should Buy

Best For

Homeowners in colder climates replacing 15+ year old furnaces will benefit most from the 96% efficiency and heating-focused design. This setup makes economic sense for anyone who qualifies for manufacturer or utility rebates, reducing the effective cost.

Consider Alternatives If

Buyers prioritizing quiet operation or systems with variable-capacity compressors should look at higher-tier Goodman models, as this single-stage design cycles rather than modulates.

Goodman 4 Ton 14 SEER 96% 80,000 BTU Furnace & AC
$0
Buy at HVACDirect →

Installation

Installation requires standard HVAC practices. The unit accepts PVC or plastic exhaust flue, simplifying venting through exterior walls compared to metal flue requirements on older furnaces. Refrigerant connections use 3/8-inch liquid and 1 1/8-inch suction lines with 1/2-inch insulation thickness, standard for 4-ton systems. The A-coil evaporator matches upflow configuration. Electrical hookup is straightforward for certified installers working with 208/230V single-phase power. Plan 8-12 hours for professional installation including ductwork modifications if needed.

Warranty & Reliability

The 10-year parts and labor warranty activates upon online registration, a common practice among major manufacturers. This covers compressor failure, heat exchanger defects, and component failures under normal use. The Goodman evaporator coil carries separate warranty protection, safeguarding one of the system's most expensive components. Labor coverage makes repair costs predictable during the critical first decade of ownership.

Specifications

SKULS381183850
Brand/ManufacturerOnline Supply
Cooling BTU48,000
Heating BTU48,000
RefrigerantR410A or R22
Electrical208 / 230 V. 1 Phase 60 Hz
Warranty10 Years with Online Registration
Decibel Level (dBA)74
Weight (in lbs)48.000000
FeatureSpec
Safety InformationPROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Airflow DirectionUpflow/Horizontal
Exhaust Flue RequirementPlastic / PVC
Furnace Efficiency / AFUE96%
Blower MotorMulti Speed
Maximum CFM1600
ConfigurationUpflow / Downflow
Flue LocationRight
Burner StagesSingle
Fuel TypeGas
Height30"
Width21"
Depth21"
ResourcesCAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents.
Product FeaturesRebate Available
Energy StarYes
SEER1 (Efficiency)16
Condenser StagesSingle Stage
Compressor TypeScroll
Liquid Valve Size3/8"
Suction Valve Size7/8"
Max Breaker Size45 amps
Min. Breaker Size26.4 amps
Tonnage5 Ton
Valve TypeSweat
Liquid Line3/8"
Suction Line1 1/8"
StyleA-Coil
Suction Line Insulation Thickness1/2"
Length50 feet

Frequently Asked Questions

Why does the spec sheet list this as both 4-ton and 5-ton? +
This appears to be a documentation error from the manufacturer or retailer. The product title specifies 4-ton capacity, and the cooling/heating BTU ratings of 48,000 each confirm 4-ton sizing. Contact the seller for clarification before purchase to avoid confusion during warranty claims or future service.
Can I use R22 refrigerant if my existing system has it? +
Yes, the specs note this unit accepts either R410A or R22. However, transitioning from R22 to a new R410A system typically requires a complete refrigerant flush and component change. Mixing refrigerants damages the compressor. A technician should assess your current system before deciding on retrofit compatibility.
How much will this system save on heating bills compared to my 80% AFUE furnace? +
The 96% efficiency gains 16 percentage points on conversion efficiency. On a typical $1,200 annual gas bill, this translates to roughly $200 annual savings in heating costs. Results vary by climate zone, fuel prices, and usage patterns. Colder regions see higher absolute dollar savings.
Is 16 SEER2 actually better than the 14 SEER rating in the title? +
Yes, this is a positive surprise. The product title claims 14 SEER, but specs show 16 SEER2, which is the newer efficiency standard. SEER2 uses more demanding testing conditions than legacy SEER ratings, so 16 SEER2 represents genuinely strong cooling performance for a 4-ton unit.
What does the 10-year warranty actually cover? +
With online registration, you get 10-year coverage on parts and labor for manufacturing defects. The evaporator coil receives separate protection. Normal wear, refrigerant loss from leaks, and improper installation are excluded. Register within 30 days of installation to activate full coverage.

Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.