Review
The Goodman 4-ton combo system represents a practical middle-ground choice for homeowners balancing performance and budget. With 48,000 BTU cooling capacity and 120,000 BTU heating output, this unit tackles moderate residential loads across diverse climates. Online Supply positions this as a straightforward replacement option, and its specifications align with homes averaging 1,800 to 2,400 square feet. The upflow A-coil configuration suits most basement and attic installations, while the multi-speed blower adapts to varied ductwork.
Cooling efficiency stands at 14 SEER, which outperforms minimum federal standards and translates to approximately 8% lower AC operating costs versus 13 SEER units. The 80% AFUE furnace rate is solid for gas equipment, though not premium-tier. Dual-stage burners intelligently reduce runtime during partial-load heating, improving comfort and lowering utility spikes. The scroll compressor operates at 74 dBA, quieter than many competitors. Two-stage design means the system runs part-capacity most of the time, reserving full power for peak demand.
Pros & Cons
Pros
- 14 SEER cooling efficiency exceeds baseline 13 SEER standards by meaningful margin
- Dual-stage burner with 120,000 BTU output allows proportional heating, reducing cycling and improving comfort
- Multi-speed blower motor optimizes airflow across variable load conditions and ductwork designs
- Two-stage compressor and scroll design deliver reliable, quiet operation at 74 dBA
- 10-year warranty with online registration covers parts and labor comprehensively
Cons
- 80% AFUE is respectable but not leading-edge, high-efficiency models reach 95%+ AFUE
- Single-stage cooling cannot modulate capacity, limiting efficiency in mild-weather months
- R410A and R22 refrigerant compatibility creates servicing ambiguity for technicians
- Not ENERGY STAR certified, missing federal rebate eligibility in some jurisdictions
Who Should Buy
Best For
Homeowners in transitional climates with balanced heating and cooling demands seeking reliable equipment without premium costs. Contractors installing replacement systems where existing ductwork supports 2000 CFM airflow and upflow/horizontal configuration fits the home layout.
Consider Alternatives If
Buyers in extreme-climate regions needing high-efficiency heating should explore 95% AFUE furnaces. Northern homes relying heavily on winter heating will see slower ROI versus premium efficiency options.
Installation
This system requires standard HVAC installation practices. The upflow A-coil design fits most basement and attic placements. Electrical demand runs between 26.4 and 45 amps at 120V single-phase, compatible with most residential panels. Metal exhaust flue is mandatory for the furnace. Refrigerant line sizing uses 3/8-inch liquid and 7/8-inch suction lines with 3/8-inch insulation, standard for 4-ton equipment. Total installed cost varies by regional labor rates and ductwork compatibility.
Warranty & Reliability
Goodman backs this system with a 10-year parts and labor warranty upon online registration. This coverage is industry-standard and protects against compressor failure, heat exchanger defects, and component malfunction. Registration is straightforward and typically completed during commissioning. Coverage applies to original homeowners in most jurisdictions. Non-registered units revert to 5-year parts-only coverage, making registration essential for full protection.
Specifications
| SKU | LS38783830 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 48,000 |
| Heating BTU | 120,000 |
| Refrigerant | R410A or R22 |
| Electrical | 120 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 74 |
| Weight (in lbs) | 30.000000 |
| Feature | Spec |
| Energy Star | No |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 7/8" |
| Max Breaker Size | 45 amps |
| Min. Breaker Size | 26.4 amps |
| Tonnage | 5 Ton |
| Height | 30" |
| Width | 24.5" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | Multi-Speed |
| Maximum CFM | 2000 |
| Configuration | Upflow / Downflow |
| Burner Stages | Two |
| Fuel Type | Gas |
| Liquid Line | 3/8" |
| Suction Line | 7/8" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/8" |
| Length | 30 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.