4 Ton 14 SEER 80% AFUE 80,000 BTU Goodman Gas Furnace and Air Conditioner System - Upflow Review 2026

// Bottom Line

This Goodman combo works best for contractors completing mid-range residential replacements in moderate climates where balanced cooling and heating matter equally. It's a competent, proven system that won't break budgets but lacks premium efficiency tiers.

Review

The Goodman 4-ton gas furnace and air conditioner system represents the mainstream middle ground of residential HVAC. This combination unit bundles a scroll-compressor cooler delivering 48,000 BTU with a two-stage gas furnace rated at 80,000 BTU. Online Supply's offering lands in the value segment where contractors source replacement equipment for homes without premium efficiency requirements. The upflow configuration suits typical residential installations in attics or utility closets.

Performance specs reveal a competent but unexceptional unit. The 14 SEER cooling rating is respectable for single-stage compressor technology, though it lags newer variable-speed models. The 80% AFUE furnace efficiency meets minimum standards but trails current market leaders hitting 95% AFUE. The high-efficiency multi-speed blower reaches 2,000 CFM maximum, supporting adequate air distribution. At 74 dBA, noise output is moderate to loud, audible from living spaces during cooling cycles. Electrical requirements are straightforward at 120V, 1-phase 60Hz with 26.4 to 45-amp breaker sizing.

Pros & Cons

Pros

14 SEER cooling efficiency is solid for non-variable-speed units, delivering 48,000 BTU output
Two-stage gas burner with 80,000 BTU heating capacity suits mixed-climate regions
High-efficiency multi-speed blower motor maximizes airflow up to 2,000 CFM
Scroll compressor is proven, reliable technology with good longevity track record
Upflow configuration fits standard attic or basement installations without major ductwork changes
10-year warranty with online registration provides reasonable protection for equipment investment

Cons

Single-stage compressor means fixed cooling output, no modulation for partial-load efficiency gains
80% AFUE is dated by today's standards, newer two-stage units hit 95% regularly
74 dBA noise level is noticeably loud, comparable to busy city traffic during operation
Not Energy Star certified, missing rebate eligibility in many utility programs
R410A or R22 refrigerant compatibility creates supply chain uncertainty

Who Should Buy

Best For

Contractors replacing older 3.5-ton or 4-ton systems in homes with typical load requirements and modest budgets. Homeowners in moderate climates where 14 SEER cooling and 80% heating efficiency meet baseline needs without premium pricing.

Consider Alternatives If

Anyone prioritizing lower operating costs should skip this for variable-speed or two-stage compressor units hitting 16+ SEER or furnaces above 90% AFUE.

4 Ton 14 SEER 80% AFUE 80,000 BTU Goodman Gas Furn

Buy at HVACDirect →

Installation

Installation demands standard equipment and skills. The A-coil style pairs cleanly with furnace plenums. Suction and liquid lines measure 7/8-inch and 3/8-inch respectively, matching typical linesets. Insulation thickness of 3/8-inch on suction lines prevents condensation issues. Metal exhaust flue requirement keeps installation conventional. Most experienced HVAC technicians complete full replacement in one day without complications.

Warranty & Reliability

Ten-year parts warranty activates upon online registration, a reasonable safety net protecting against manufacturer defects. Coverage excludes normal wear, improper installation, and refrigerant loss. Goodman's warranty administration is straightforward through Online Supply or authorized dealers. This protection level is standard for this equipment tier and builds confidence for homeowner peace of mind.

Specifications

SKU	LS38783830
Brand/Manufacturer	Online Supply
Cooling BTU	48,000
Heating BTU	80,000
Refrigerant	R410A or R22
Electrical	120 V. 1 Phase 60 Hz
Warranty	10 Years with Online Registration
Decibel Level (dBA)	74
Weight (in lbs)	30.000000
Feature	Spec
Energy Star	No
SEER1 (Efficiency)	14
Condenser Stages	Single Stage
Compressor Type	Scroll
Liquid Valve Size	3/8"
Suction Valve Size	7/8"
Max Breaker Size	45 amps
Min. Breaker Size	26.4 amps
Tonnage	5 Ton
Height	30"
Width	21"
Depth	21"
Resources	CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents.
Safety Information	PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Airflow Direction	Upflow/Horizontal
Exhaust Flue Requirement	Metal
Furnace Efficiency / AFUE	80%
Blower Motor	High Efficiency Multi-Speed
Maximum CFM	2000
Configuration	Upflow / Downflow
Burner Stages	Two
Fuel Type	Gas
Liquid Line	3/8"
Suction Line	7/8"
Style	A-Coil
Suction Line Insulation Thickness	3/8"
Length	30 feet

Frequently Asked Questions

How does the 14 SEER rating compare to newer systems? +

14 SEER is solid but mid-tier. Modern variable-speed units achieve 16-18 SEER, reducing cooling costs by 15-25% annually. This Goodman suits homeowners accepting baseline efficiency for lower upfront investment. Payback through energy savings typically requires 8-10 years in moderate climates.

Will this fit my existing ductwork and furnace location? +

The upflow configuration works in basements and attics where standard installations exist. At 30 inches tall and 21 inches wide/deep, it fits typical closets. Confirm your current lineset sizes and ductwork capacity with a technician before ordering to avoid compatibility issues.

Is 80% AFUE sufficient for heating efficiency? +

80% AFUE is functional but dated. Modern furnaces achieve 90-95% AFUE, cutting heating costs 12-18% annually. This unit suits moderate climates with balanced heating demands. In cold-climate zones, upgrading to 90%+ AFUE delivers faster payback despite higher purchase price.

Why is this cheaper than higher-SEER competitors? +

Single-stage cooling and basic efficiency levels reduce manufacturing complexity and materials cost. Variable-speed or two-stage compressor units justify premium pricing through modulated operation and lower runtime. This Goodman sacrifices efficiency sophistication for affordability, making it right for cost-conscious buyers.

What does the 10-year warranty actually cover? +

Parts coverage protects against manufacturing defects and compressor failure. Online registration is required. Exclusions include improper installation, refrigerant loss, and maintenance neglect. Labor and trip charges fall outside coverage, so clarify service agreements with your contractor beforehand.

Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.