Review
The ACiQ ACIQ-48-EHPD-UPG is a no-frills residential heating and cooling system positioned as a budget-friendly replacement for aging Goodman furnace-condenser pairs. Manufactured under the ACiQ brand, which operates as Goodman's value-tier division, this unit targets contractors managing maintenance calls and homeowners watching their upgrade budgets. The upflow/horizontal configuration and compact dimensions make it suitable for standard residential installations, though its performance sits firmly in the entry-level tier.
Performance specs tell a straightforward story. The furnace delivers 47,000 BTU output at 92% AFUE, matching current mid-range standards. Cooling capacity reaches 46,000 BTU with a 14 SEER1 rating, qualifying for ENERGY STAR but trailing premium 16-18 SEER systems. The scroll compressor operates at single-stage capacity, cycling on and off rather than modulating. Maximum airflow hits 2,000 CFM through the multi-speed blower, adequate for most residential ducts. At 74 dBA, the unit produces noticeable noise during operation.
Pros & Cons
Pros
- 92% AFUE furnace efficiency paired with 14 SEER1 cooling delivers solid all-around performance for residential applications
- Lightweight 120-pound design simplifies installation and relocation compared to heavier units
- Compact 21x21x30-inch footprint fits tight mechanical closets and basement installations
- Multi-speed blower motor provides flexibility in airflow matching for different duct configurations
- 10-year parts warranty with online registration offers reasonable protection at this price point
Cons
- R454B refrigerant is lower-pressure than R410A, limiting long-term availability and technician familiarity in some regions
- 46,000 BTU cooling capacity falls short for larger homes or hot climates requiring more than 4-ton equivalent cooling
- Single-stage compressor and condenser lack the modulation efficiency of variable-capacity systems during partial-load operation
- 74 dBA noise level is audible during operation, noticeable in quiet residential settings
Who Should Buy
Best For
Homeowners replacing an aging GSZ140491 or similar Goodman unit in mild-to-moderate climates who prioritize budget over cutting-edge efficiency. Contractors seeking reliable replacement inventory for standard residential retrofits will appreciate the straightforward specs and compact design.
Consider Alternatives If
Anyone in hot climates needing maximum cooling capacity, homes with ductwork sized for 5-ton units, or buyers unwilling to work with R454B refrigerant should look at competing 16 SEER or higher models.
Installation
Installation complexity is moderate. The unit requires 208/230V single-phase power with 26.4 to 40-amp breaker sizing. Suction line insulation is 1/2-inch thick, with suction and liquid lines sized at 1 1/8-inch and 3/8-inch respectively, fitting standard refrigerant connections. The plastic PVC exhaust flue and right-side flue location simplify furnace venting. Technicians should note the R454B refrigerant requires proper evacuation and charging procedures.
Warranty & Reliability
ACiQ provides a 10-year parts warranty upon online registration, a reasonable coverage window at this price tier. The warranty does not include labor, meaning major compressor or heat exchanger failure after year five could mean significant out-of-pocket repair costs. Online registration is mandatory to activate coverage, so documentation is critical at installation.
Specifications
| SKU | ACIQ-48-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 46,000 |
| Heating BTU | 47,000 |
| Refrigerant | R454B |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 74 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Furnace Efficiency / AFUE | 92% |
| Blower Motor | Multi Speed |
| Maximum CFM | 2000 |
| Configuration | Upflow / Downflow |
| Flue Location | Right |
| Burner Stages | Single |
| Fuel Type | Gas |
| Height | 30" |
| Width | 21" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Replaces | GSZ140491 |
| Product Features | Rebate Available |
| Energy Star | Yes |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 7/8" |
| Max Breaker Size | 40 amps |
| Min. Breaker Size | 26.4 amps |
| Tonnage | 5 Ton |
| Valve Type | Sweat |
| Liquid Line | 3/8" |
| Suction Line | 1 1/8" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 1/2" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.