Independent Review · Updated June 2026

4 Ton 15 SEER 96% AFUE 100,000 BTU Goodman Gas Furnace and Air Conditioner System - Upflow

96% AFUE furnace with 16 SEER cooling delivers solid efficiency for budget-conscious contractors

8.2
IndustrialRank Score
Efficiency
8.5
Reliability
7.8
Value
8.0
Installation
8.5
Warranty
8.0
4 Ton 15 SEER 96% AFUE 100,000 BTU Goodman Gas Furnace and Air Conditioner System - Upflow
Current Price
$0
Check Price at HVACDirect → Shop Now at HVACDirect
Authorized dealer · Full manufacturer warranty
// Bottom Line
This Goodman system works best for contractors handling mid-range residential replacements where efficiency matters but premium performance isn't required. The 96% AFUE heating and 16 SEER cooling strike a practical balance between operational cost savings and upfront equipment investment.

Review

Goodman's 4-ton upflow system positions itself as a workhorse solution for residential HVAC replacements. The combination of 96% AFUE heating efficiency and 16 SEER cooling places it squarely in the mid-efficiency segment that contractors favor for value-conscious customers. At 48 pounds with compact 30x21x21 dimensions, installation fits most standard upflow applications. The unit operates on standard 208/230V single-phase power and uses R410A or R22 refrigerant compatibility.

Performance-wise, this system delivers where it counts. The furnace generates 100,000 BTU heating output with two-stage burner capability for modulated comfort during partial-load conditions. Cooling reaches 45,500 BTU through a scroll compressor with maximum airflow of 1,600 CFM from the ECM blower motor. The 16 SEER rating translates to real summer savings, though the single-stage condenser means it runs at full capacity once cooling kicks in. PVC exhaust venting simplifies installation in contemporary home designs.

Pros & Cons

Pros

  • 96% AFUE furnace efficiency reduces heating bills significantly compared to 80-90% models
  • 16 SEER cooling rating delivers strong summer performance for 4-ton applications
  • ECM multi-speed blower motor optimizes airflow while reducing energy consumption
  • Two-stage gas burner provides modulating heating for improved comfort and efficiency
  • PVC exhaust flue compatibility simplifies venting in modern home configurations
  • 10-year warranty with online registration covers parts and provides peace of mind

Cons

  • Single-stage condenser limits cooling modulation compared to two-stage competitors
  • 73 dB noise level runs louder than premium variable-capacity units during operation
  • Specs show 5-ton tonnage rating but product title claims 4-ton, creating potential confusion on capacity

Who Should Buy

Best For

Contractors replacing aging furnace-AC combos in homes without premium budget allocations will find strong value here. Homeowners in moderate climates wanting efficient heating and cooling without luxury features should consider this system.

Consider Alternatives If

Skip this if you need variable-stage cooling technology, minimal noise operation, or live in extreme hot climates where maximum AC capacity matters daily.

4 Ton 15 SEER 96% AFUE 100,000 BTU Goodman Gas Fur
$0
Buy at HVACDirect →

Installation

This upflow configuration requires standard ductwork preparation and proper electrical service verification. The 40-amp maximum breaker requirement fits most residential panels without upgrades. Refrigerant lines use 3/8-inch liquid and 1 1/8-inch suction sizing with 50 feet of included insulated line. PVC flue venting from the right side integrates easily with modern venting standards. Technicians should verify furnace placement accommodates upflow airflow direction before installation begins.

Warranty & Reliability

Goodman backs this system with a full 10-year parts warranty once you complete online registration. This coverage spans the furnace, condenser, and included evaporator coil, providing substantial protection for residential applications. Registration is straightforward and activates immediately upon completion. For contractors, this warranty period aligns with typical customer retention cycles and simplifies service callbacks.

Specifications

SKULS381183850
Brand/ManufacturerOnline Supply
Cooling BTU45,500
Heating BTU100,000
RefrigerantR410A or R22
Electrical208 / 230 V. 1 Phase 60 Hz
Warranty10 Years with Online Registration
Decibel Level (dBA)73
Weight (in lbs)48.000000
FeatureSpec
Airflow DirectionUpflow/Horizontal
Exhaust Flue RequirementPlastic / PVC
Furnace Efficiency / AFUE96%
Blower MotorMulti-Speed - ECM
Maximum CFM1600
ConfigurationUpflow / Downflow
Flue LocationRight
Energy StarYes
Burner StagesTwo
Fuel TypeGas
Height30"
Width21"
Depth21"
ResourcesCAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
ReplacesGSX16S481
SEER1 (Efficiency)16
Condenser StagesSingle Stage
Compressor TypeScroll
Liquid Valve Size3/8"
Suction Valve Size7/8"
Max Breaker Size40 amps
Min. Breaker Size23.9 amps
Tonnage5 Ton
Liquid Line3/8"
Suction Line1 1/8"
StyleA-Coil
Suction Line Insulation Thickness1/2"
Length50 feet

Frequently Asked Questions

What's the actual tonnage of this system, 4-ton or 5-ton? +
The specs show conflicting information, with the title stating 4-ton while specifications list 5-ton tonnage. Verify with your supplier before ordering. The 45,500 BTU cooling output suggests 3.8-ton capacity more accurately. Contact the seller to clarify before purchase and ensure it matches your home's actual load requirements.
Can this furnace use my existing R22 refrigerant lines, or do I need new copper? +
This unit accepts either R410A or R22 refrigerant, which is helpful for retrofits. However, R22 systems typically require different metering devices and may have compatibility issues with new compressors. Consult with your HVAC tech about your specific existing line setup. New installation with R410A is generally recommended for optimal performance.
How does 96% AFUE compare to standard furnaces on heating costs? +
96% AFUE means 96 cents of every gas dollar converts to usable heat, losing only 4% up the flue. Compared to 80% AFUE units, you'll save roughly 20% on heating energy. A typical home heating season could see $300-500 annual savings depending on climate zone and usage patterns. Over the 10-year warranty, that compounds meaningfully.
Is 16 SEER good enough, or should I upgrade to 18+ SEER models? +
16 SEER delivers solid summer efficiency and qualifies for most Energy Star rebates. Higher SEER units offer marginal improvements that take 10-15 years to recoup through electricity savings. For moderate climates with moderate cooling demand, 16 SEER provides excellent value. Consider 18+ SEER only if you're in hot climates with extreme summer usage.
Does online registration affect warranty coverage if I don't complete it? +
Yes, Goodman requires online registration to activate the 10-year warranty. Without registration, coverage defaults to a shorter period. Complete registration immediately after installation takes just minutes. Keep documentation for any future service claims or if you sell the home.

Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.