Review
The Goodman 5-ton gas furnace and air conditioner combo represents the practical middle ground in HVAC systems. It delivers solid performance for homeowners who need both heating and cooling without paying for premium efficiency tiers. This upflow configuration handles standard residential applications well, making it a popular choice for replacement jobs where space constraints exist and budgets run moderate.
Performance specs show a 60,000 BTU cooling capacity at 13 SEER efficiency and 100,000 BTU heating output at 80% AFUE. The two-stage burner reduces short cycling during mild weather, while the high-efficiency multi-speed blower moves up to 2,000 CFM. A reciprocating compressor handles single-stage cooling. These numbers deliver respectable comfort in moderate climates but trail modern 16+ SEER and 95% AFUE competitors in efficiency metrics.
Pros & Cons
Pros
- Two-stage burner heating with 100,000 BTU output reduces temperature swings and improves comfort
- 13 SEER cooling efficiency balances performance with affordability for moderate climates
- High-efficiency multi-speed blower motor with 2,000 CFM maximum airflow optimizes comfort and dehumidification
- Compact footprint (30 by 21 by 21 inches) fits standard closets and utility spaces
- 10-year warranty with online registration provides meaningful protection at this price point
Cons
- 80% AFUE falls below modern 95% AFUE standards, costing more in heating fuel over the system's life
- Single-stage compressor in AC section lacks variable capacity, cycling on and off rather than modulating
- 77 dB noise level is audible and louder than some competing mid-tier models
- Not Energy Star certified, missing qualification for many rebate programs
Who Should Buy
Best For
Homeowners replacing older systems in moderate climates who prioritize upfront affordability and reliable performance. Contractors installing affordable combos for price-conscious customers who don't need premium efficiency ratings.
Consider Alternatives If
Buyers in cold climates needing maximum heating efficiency, homes with tight budgets for utility bills, or those seeking ENERGY STAR certification for tax credits.
Installation
Installation requires standard refrigerant lines (3/8 inch liquid, 7/8 inch suction with 3/8 inch insulation), a metal exhaust flue, and 120V single-phase 60Hz power. Breaker sizing runs between 32.8 and 45 amps. The compact 30-pound condenser unit suits both upflow and downflow configurations, though placement with adequate clearance simplifies service access.
Warranty & Reliability
The 10-year parts warranty applies when you register the system online, offering solid coverage for compressor failure, heat exchanger damage, and component defects. This warranty length matches competitor offerings at this price tier. Coverage excludes labor and refrigerant, which contractors handle separately.
Specifications
| SKU | LS38783830 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 60,000 |
| Heating BTU | 100,000 |
| Refrigerant | R410A or R22 |
| Electrical | 120 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 77 |
| Weight (in lbs) | 30.000000 |
| Feature | Spec |
| Replaces | GSX130603, GSX130604, GSX130605, GSX130611, GSX130613, GSX130614 |
| Energy Star | No |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Reciprocating |
| Liquid Line | 3/8" |
| Suction Line | 7/8" |
| Liquid Valve Size | 3/8" |
| Max Breaker Size | 45 amps |
| Min. Breaker Size | 32.8 amps |
| Tonnage | 5 Ton |
| Valve Type | Sweat |
| Height | 30" |
| Width | 21" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | High Efficiency Multi-Speed |
| Maximum CFM | 2000 |
| Configuration | Upflow / Downflow |
| Burner Stages | Two |
| Fuel Type | Gas |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/8" |
| Length | 30 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.