Review
The Goodman 5-ton split system sits squarely in the contractor-friendly, budget-conscious segment of the HVAC market. With 60,000 BTU cooling capacity and 80,000 BTU heating output, it handles typical single-family homes and light commercial applications. This unit replaces six older Goodman condenser models (GSX130603 through GSX130614), making it a straightforward swap for technicians working with existing installations. Online Supply positions this as a direct alternative for cost-sensitive jobs where brand continuity matters.
Performance specs show solid middle-ground engineering. The 13 SEER rating matches industry expectations for non-inverter systems, while the 80% AFUE furnace efficiency is functional though not exceptional by today's standards. The reciprocating compressor handles single-stage operation cleanly, trading variable capacity for mechanical simplicity and repair accessibility. Two-stage burners provide better comfort than single-stage ignition, and the high-efficiency multi-speed blower reaches 2,000 CFM maximum while adapting to actual load conditions. R410A refrigerant compatibility keeps it current with environmental standards.
Pros & Cons
Pros
- 13 SEER rating provides respectable cooling efficiency at an accessible price point
- 80,000 BTU heating capacity with two-stage burners allows better comfort modulation than single-stage units
- Two-speed blower motor optimizes airflow between 60,000 and 2,000 CFM based on demand
- Compact dimensions (30x21x21 inches) fit standard equipment pads with minimal space requirements
- 10-year warranty with online registration covers parts and labor in most regions
Cons
- 80% AFUE is baseline for modern furnaces, not high-efficiency like 95% AFUE condensing models
- Single-stage compressor lacks variable capacity found in higher-tier systems, less responsive to partial-load conditions
- Not Energy Star certified, so it misses federal recognition for efficiency standards
- 77 dB noise level is moderately loud, noticeable during operation compared to quieter variable-speed units
Who Should Buy
Best For
Contractors stocking affordable replacements for older Goodman units or homeowners replacing failed systems in moderate climates where premium efficiency isn't justified by utility savings. This works well for rental properties and secondary residences where upfront cost matters more than energy optimization.
Consider Alternatives If
Buyers in extreme climates or those prioritizing annual energy bill reduction should consider higher SEER (14-16) and AFUE (90%+) models, which recoup higher purchase prices through utility savings.
Installation
Installation follows conventional split-system procedures with minimal complexity. The upflow configuration suits basement or utility closet placement, and the compact footprint (30x21x21 inches) fits standard pads. Line sets require 3/8 inch suction and 7/8 inch liquid lines with sweat valves, standard fitting for most HVAC shops. Metal exhaust flue and 120V/60Hz electrical requirements are straightforward. Expect 4 to 6 hours for an experienced two-person crew on a replacement job.
Warranty & Reliability
The 10-year parts warranty with online registration provides solid protection for residential applications. Coverage typically includes compressor, heat exchanger, and coil defects, though specific terms depend on regional dealer policies. Registration is straightforward and should be completed immediately after installation to activate coverage and establish documentation for any future claims.
Specifications
| SKU | LS38783830 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 60,000 |
| Heating BTU | 80,000 |
| Refrigerant | R410A or R22 |
| Electrical | 120 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 77 |
| Weight (in lbs) | 30.000000 |
| Feature | Spec |
| Replaces | GSX130603, GSX130604, GSX130605, GSX130611, GSX130613, GSX130614 |
| Energy Star | No |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Reciprocating |
| Liquid Line | 3/8" |
| Suction Line | 7/8" |
| Liquid Valve Size | 3/8" |
| Max Breaker Size | 45 amps |
| Min. Breaker Size | 32.8 amps |
| Tonnage | 5 Ton |
| Valve Type | Sweat |
| Height | 30" |
| Width | 21" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | High Efficiency Multi-Speed |
| Maximum CFM | 2000 |
| Configuration | Upflow / Downflow |
| Burner Stages | Two |
| Fuel Type | Gas |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/8" |
| Length | 30 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.