Review
The Goodman ACIQ-60-EHPD system combines a gas furnace rated at 120,000 BTU with a 60,000 BTU cooler in a compact horizontal A-coil configuration. This 5-ton setup addresses the middle market, where contractors balance efficiency upgrades against budget constraints. Goodman has held contractor mindshare for years through straightforward engineering and parts availability, and this unit maintains that reputation without chasing premium-tier SEER ratings.
The furnace delivers 96% AFUE efficiency with a two-stage burner that moderates fuel consumption during partial-load heating. The air conditioner achieves 13 SEER1 cooling efficiency using R454B refrigerant and a reciprocating compressor, backed by Energy Star certification. Electrical draw peaks at 45 amps on a 115V single-phase circuit, keeping it compatible with standard residential service. The multi-speed ECM blower motor can move up to 2,000 CFM, allowing flexible airflow matching across seasons.
Pros & Cons
Pros
- 96% AFUE furnace efficiency exceeds most baseline units, reducing heating costs measurably
- 13 SEER cooler with Energy Star certification handles 5-ton cooling loads reliably
- Multi-speed ECM blower motor optimizes comfort across heating and cooling cycles
- Lifetime heat exchanger warranty protects against furnace failure, the costliest component
- Two-stage burner reduces short-cycling and improves temperature consistency in winter
Cons
- 13 SEER ranks mid-tier, not high-efficiency, higher-SEER options exist for 15-16 range
- Single-stage compressor means less modulation in cooling, higher energy use during partial loads
- 77 dB noise level acceptable but noticeably louder than variable-speed compressor units
Who Should Buy
Best For
Homeowners replacing 10-15 year old equipment in HVAC zones 4-6 will see the biggest savings without oversizing to premium equipment. Contractors installing retrofit systems where ductwork limits variable-speed cooling should consider this workhorse setup.
Consider Alternatives If
Hot climate buyers needing 16+ SEER and those prioritizing whisper-quiet operation should explore variable-capacity alternatives.
Installation
The unit requires plastic or PVC flue exhaust, standard in modern installs. Suction and liquid lines measure 7/8 inch and 3/8 inch respectively, with 3/8 inch line insulation supplied. At 34.5 inches tall by 24.5 inches wide, horizontal placement fits tight basements and attics. Sweat valve connections demand field soldering, adding labor versus push-fit alternatives on premium models.
Warranty & Reliability
Coverage includes a lifetime warranty on the heat exchanger, 10-year unit replacement, and 10-year parts protection with online registration. The heat exchanger protection matters most, since replacing a failed unit typically costs 40-50% of system price. Ten-year parts coverage helps offset component failures during the critical second decade of operation.
Specifications
| SKU | ACIQ-60-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 60,000 |
| Heating BTU | 120,000 |
| Refrigerant | R454B |
| Electrical | 115 V. 1 Phase 60 Hz |
| Warranty | Lifetime Heat Exchanger, 10 Years Unit Replacement, and 10 Years Parts with Online Registration |
| Decibel Level (dBA) | 77 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| Replaces | GSX130603, GSX130604, GSX130605, GSX130611, GSX130613, GSX130614 |
| Energy Star | Yes |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Reciprocating |
| Liquid Line | 3/8" |
| Suction Line | 7/8" |
| Liquid Valve Size | 3/8" |
| Max Breaker Size | 45 amps |
| Min. Breaker Size | 32.8 amps |
| Tonnage | 5 Ton |
| Valve Type | Sweat |
| Height | 34.5" |
| Width | 24.5" |
| Depth | 28.75" |
| Resources | GMEC96 Installation Manual GMEC96 Specifications Sheet GMEC96 Owner's Manual GMEC96 Service Manual GMEC96 Replacement Parts Manual GMEC96 Brochure Goodman Furnace Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Configuration | Upflow/Horizontal |
| Style | A-Coil |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Furnace Efficiency / AFUE | 96% |
| Blower Motor | Multi-Speed - ECM |
| Maximum CFM | 2000 |
| Flue Location | Right |
| Burner Stages | Two |
| Fuel Type | Gas |
| Suction Line Insulation Thickness | 3/8" |
| Length | 30 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.