Review
The ACiQ 5-ton combo system sits squarely in the practical middle ground of residential HVAC. It combines Goodman's manufacturing backbone with ACiQ branding, delivering a 120,000 BTU furnace paired with a 60,000 BTU cooling section in an upflow A-coil configuration. This system targets contractors and homeowners seeking reliable efficiency improvements without venture-capital pricing. The unit measures 30 inches tall by 24.5 inches wide, fitting standard closet installations and utility spaces.
Performance specs reveal a competent mid-tier performer. The furnace achieves 96% AFUE using a two-stage burner, while the air conditioning side delivers 13 SEER with a single-stage reciprocating compressor. The multi-speed ECM blower maxes out at 2000 CFM, providing modulation capacity for better humidity management. Cooling capacity of 60,000 BTU properly matches the 5-ton tonnage rating. Electrical requirements stay within 32.8 to 45 amp breaker range at 208/230V single-phase, keeping most existing service panels compatible.
Pros & Cons
Pros
- 96% AFUE furnace efficiency with two-stage burners reduces fuel waste and heating costs significantly
- 13 SEER rating meets mid-tier efficiency standards without pushing into ultra-premium pricing territory
- Multi-speed ECM blower motor delivers up to 2000 CFM with better humidity control and quieter operation
- PVC exhaust compatibility simplifies venting in tight attic or basement installations
- 10-year warranty with online registration covers both components, providing solid peace of mind
Cons
- 77 dB noise level is louder than many competitors, potentially noticeable in quiet residential settings
- Single-stage condenser means less efficient cooling during partial-load conditions compared to two-stage units
- R454B refrigerant limits field servicing options as not all technicians stock this newer refrigerant yet
Who Should Buy
Best For
Contractors performing residential HVAC upgrades in regions with moderate heating and cooling demands, particularly those prioritizing installation speed and proven reliability over cutting-edge efficiency ratings. Homeowners replacing aging systems who want efficiency gains without the cost premium of 16+ SEER units.
Consider Alternatives If
Buyers in extreme climate zones requiring peak performance, sound-sensitive residential areas near bedrooms, or those seeking the latest R-32 refrigerant technology.
Installation
Installation favors experienced technicians. The unit requires PVC venting on the right side, 3/8 inch sweat connections for refrigerant lines, and proper 3/8 inch suction line insulation. Pre-drilled mounting locations and standard connection sizes streamline rough-in work. Upflow positioning suits basement furnace rooms and tight attic spaces where downflow alternatives create headaches. Most contractors complete rough-in and startup within one service visit.
Warranty & Reliability
The 10-year parts warranty activates with online registration, covering both furnace and air conditioning components equally. This protects against compressor failure, heat exchanger cracking, and motor defects during the critical first decade. Registration is straightforward through ACiQ's website. Labor costs fall on the homeowner or contractor, so repair bills for service calls remain separate from warranty coverage.
Specifications
| SKU | ACIQ-60-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 60,000 |
| Heating BTU | 120,000 |
| Refrigerant | R454B |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 77 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Furnace Efficiency / AFUE | 96% |
| Blower Motor | Multi-Speed - ECM |
| Maximum CFM | 2000 |
| Configuration | Upflow / Downflow |
| Flue Location | Right |
| Energy Star | No |
| Burner Stages | Two |
| Fuel Type | Gas |
| Height | 30" |
| Width | 24.5" |
| Depth | 21" |
| Resources | CAPT Installation Manual CAPT Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Replaces | GSX130603, GSX130604, GSX130605, GSX130611, GSX130613, GSX130614 |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Reciprocating |
| Liquid Line | 3/8" |
| Suction Line | 7/8" |
| Liquid Valve Size | 3/8" |
| Max Breaker Size | 45 amps |
| Min. Breaker Size | 32.8 amps |
| Tonnage | 5 Ton |
| Valve Type | Sweat |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/8" |
| Length | 30 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.