Review
The ACiQ 5-ton horizontal slab coil condenser represents a practical entry-level solution for residential cooling in the competitive 13 SEER segment. Designed as a drop-in replacement for six Goodman legacy models, this unit eliminates compatibility guesswork for contractors managing fleet replacements. Operating at 60,000 BTU cooling capacity with a single-stage reciprocating compressor, it delivers consistent performance without the complexity of variable-stage systems. The horizontal slab configuration addresses a real installation challenge, making it suitable for basements, crawl spaces, and clearance-restricted locations where vertical condensers won't fit.
Performance metrics confirm solid mid-range capability. The 13 SEER1 efficiency rating translates to approximately 13 BTU of cooling output per watt-hour consumed, positioning it favorably against older R410A units while meeting current minimum efficiency standards. Running on R454B refrigerant with a 3/8-inch liquid line and 7/8-inch suction line, the unit integrates smoothly into standard residential systems. At 77 dB, noise output sits slightly above quiet-operation thresholds but remains acceptable for most residential applications. Electrical requirements of 208/230V single-phase with a 32.8 to 45 amp breaker range align with typical residential service panels.
Pros & Cons
Pros
- Proven replacement compatibility with six Goodman legacy models (GSX130603 through GSX130614), eliminating guesswork on part numbers
- 13 SEER1 efficiency strikes a reasonable balance between performance and affordability, qualifying for many utility rebates in 2024-2025
- R454B refrigerant future-proofs the unit against EPA phase-out pressures affecting older R410A stock
- Horizontal slab configuration ideal for basement installations, crawl spaces, and tight attic applications
- Compact dimensions (39.5 inches wide, 12 inches deep) fit congested equipment spaces without requiring extensive ductwork modifications
Cons
- 77 dB noise level is moderately loud for residential applications, particularly concerning if the condenser sits near living areas or property lines
- Single-stage compressor lacks variable capacity, meaning it cycles on and off rather than modulating output for part-load efficiency gains
- Not Energy Star certified, which disqualifies it from premium utility incentive programs and may concern environmentally-conscious buyers
- Requires 32.8 to 45 amp breaker sizing on 208/230V single-phase, demanding proper electrical service assessment before installation
Who Should Buy
Best For
Contractors performing equipment replacements on existing Goodman installations and budget-conscious homeowners in moderate climates looking for straightforward efficiency without premium features. This unit works particularly well for residential applications below 3,000 cooling degree days annually where baseline efficiency meets customer expectations.
Consider Alternatives If
Buyers prioritizing quiet operation, Energy Star certification, or variable-capacity compressors should explore competitors in the mid-tier efficiency bracket instead.
Installation
Installation is straightforward for experienced HVAC technicians. The 120-pound unit weighs less than comparable vertical condensers, simplifying logistics and reducing crew strain. Sweat-valve connections using standard 3/8-inch and 7/8-inch line sizes require basic brazing skills and proper nitrogen purging. The horizontal slab design means careful leveling during placement, preventing oil accumulation in the compressor. Pre-charge verification and refrigerant line insulation (3/8-inch thickness specified) are essential for system efficiency. Allow 30 feet of lineset on the included tubing for typical residential routing.
Warranty & Reliability
The 10-year parts warranty, activated through free online registration, provides solid coverage against manufacturing defects on compressor and major components. This extended protection is valuable given reciprocating compressor reliability in single-stage applications. However, the warranty excludes labor costs and field service, so budget separately for technician time if repairs become necessary during the coverage period.
Specifications
| SKU | ACIQ-60-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 60,000 |
| Refrigerant | R454B |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 77 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| Replaces | GSX130603, GSX130604, GSX130605, GSX130611, GSX130613, GSX130614 |
| Energy Star | No |
| SEER1 (Efficiency) | 13 |
| Condenser Stages | Single Stage |
| Compressor Type | Reciprocating |
| Liquid Line | 3/8" |
| Suction Line | 7/8" |
| Liquid Valve Size | 3/8" |
| Max Breaker Size | 45 amps |
| Min. Breaker Size | 32.8 amps |
| Tonnage | 5 Ton |
| Valve Type | Sweat |
| Height | 25" |
| Width | 39.5" |
| Depth | 12" |
| Resources | CSCF Installation Manual CSCF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Configuration | Horizontal |
| Style | Slab |
| Suction Line Insulation Thickness | 3/8" |
| Length | 30 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.