Review
The Goodman 5-ton gas furnace and air conditioner system represents a pragmatic entry point for residential cooling and heating upgrades. At $2,071, it positions itself in the value segment without cutting critical corners on component quality. This horizontal configuration model addresses a specific installation need, making it the go-to option when vertical ducting simply won't work in tight spaces. Online Supply's offering here balances proven Goodman manufacturing with realistic pricing that appeals to both replacement contractors and homeowners facing budget constraints.
Performance metrics tell an honest story about where this unit stands. The 14 SEER cooling rating means it uses approximately 13 percent less electricity than baseline 12.2 SEER equipment for the same cooling output. The 80,000 BTU heating capacity and 80% AFUE puts it at mid-market efficiency, adequate for most regions but trailing newer 95% AFUE furnaces. The variable-speed blower motor and two-stage burner are genuine advantages, cycling partially to match actual demand rather than running full-blast constantly. Maximum 2,000 CFM airflow and 75 dBA noise level are acceptable, though premium units operate quieter.
Pros & Cons
Pros
- 14 SEER cooling efficiency meets modern efficiency standards without premium pricing
- Two-stage burner and variable-speed blower motor deliver better comfort and lower runtime costs
- Horizontal configuration fits tight attic and basement spaces where vertical units won't work
- Scroll compressor is proven reliable architecture with good serviceability track record
- 10-year warranty with online registration covers both heating and cooling components
Cons
- 80% AFUE is mid-range for furnaces, newer models reach 95% AFUE
- Single-stage condenser limits part-load efficiency on mild days
- 75 dBA noise level is noticeably louder than premium quiet-operation units
- R22 refrigerant compatibility adds complexity if future service is needed
Who Should Buy
Best For
Budget-conscious homeowners replacing an older 10-ton system or contractors handling volume residential replacements in mild to moderate climates. This unit works especially well in homes where space constraints favor horizontal installation and upfront cost matters more than maximum efficiency gains.
Consider Alternatives If
Anyone seeking ENERGY STAR certification, extremely quiet operation, or peak efficiency should look at higher-tier models with 16+ SEER ratings and 95%+ AFUE.
Installation
This horizontal unit requires metal exhaust flue, standard for gas furnaces. Electrical needs 208/230V single-phase 60Hz service with 32.8 to 50 amp breaker capacity. The A-coil design works with most existing ductwork configurations. Dimensions measure 24.5 inches high by 26 inches wide by 21.125 inches deep, fitting most attic installations. R410A or R22 refrigerant compatibility means existing copper lines work without replacement. Installation typically requires HVAC certification.
Warranty & Reliability
Online Supply includes a comprehensive 10-year parts and labor warranty upon registration. This covers compressor, heat exchanger, and coil failures, protecting your investment against manufacturing defects. The registration requirement is standard industry practice. Real-world reliability depends heavily on proper installation and annual maintenance.
Specifications
| SKU | LS38783830 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 60,000 |
| Heating BTU | 80,000 |
| Refrigerant | R410A or R22 |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 75 |
| Weight (in lbs) | 30.000000 |
| Feature | Spec |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| AHRI Certificate Number | 204633307 |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | Variable Speed |
| Maximum CFM | 2000 |
| Configuration | Horizontal |
| Burner Stages | Two |
| Fuel Type | Propane, Natural Gas |
| Height | 24.5" |
| Width | 26" |
| Depth | 21.125" |
| Resources | CHPF Installation Manual CHPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Energy Star | No |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 7/8" |
| Max Breaker Size | 50 amps |
| Min. Breaker Size | 32.8 amps |
| Tonnage | 5 Ton |
| Liquid Line | 3/8" |
| Suction Line | 7/8" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/8" |
| Length | 30 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.