Review
The Goodman 5-ton combination gas furnace and air conditioner represents mainstream HVAC equipment trusted by contractors for residential replacement work. This upflow/horizontal configuration delivers 60,000 BTU cooling capacity paired with a 100,000 BTU heating stage, sized appropriately for medium homes across most climates. Online Supply markets this unit with practical engineering and strong contractor support, making it a workable choice for crews prioritizing installation speed and parts availability over cutting-edge efficiency.
Performance metrics tell a straightforward story. The 14 SEER rating on the cooling side meets post-2023 regional standards without excessive cost, while the 80% AFUE furnace sits at industry baseline for non-condensing models. The scroll compressor runs single-stage, meaning it cycles fully on and off rather than modulating capacity, which simplifies controls but reduces efficiency under partial load. Maximum airflow reaches 2000 CFM, and electrical demands stay reasonable at 32.8 to 50 amps, fitting most existing 100-amp residential service panels.
Pros & Cons
Pros
- 14 SEER cooling efficiency meets modern standards for most regions without ENERGY STAR complexity
- Two-stage burner with 100,000 BTU heating capacity provides balanced comfort and efficiency
- Scroll compressor is proven architecture with fewer failure points than rotary designs
- High-efficiency multi-speed blower with up to 2000 CFM adapts to varying load conditions
- Compact 30 x 21 x 21 inch footprint fits tight closets and utility spaces
- 10-year warranty with online registration covers manufacturer defects and coil failures
Cons
- 80% AFUE falls below modern 95%+ standards, resulting in higher heating costs over time
- Single-stage cooling compressor cycles on/off rather than modulating capacity smoothly
- Not ENERGY STAR certified, limiting appeal to efficiency-conscious buyers
- 75 dB noise level runs louder than inverter-driven competitors during operation
Who Should Buy
Best For
Contractors restocking inventory with reliable mid-range equipment and homeowners replacing older systems who want proven technology without premium pricing. This system works well in climates where heating costs aren't extreme and efficiency is secondary to upfront affordability.
Consider Alternatives If
Buyers seeking ENERGY STAR certification, homes in cold climates where 95%+ AFUE becomes cost-justified, or noise-sensitive installations near bedrooms.
Installation
Installation requires metal exhaust flue venting, R410A or R22 refrigerant charging, and standard lineset connections using 3/8 inch liquid line and 7/8 inch suction line with 3/8 inch factory insulation. The A-coil configuration demands upflow or downflow mounting, and the unit needs 120V single-phase power. Technicians appreciate the straightforward design, but proper airflow testing and ductwork balance remain essential for rated performance.
Warranty & Reliability
Goodman backs this system with 10 years parts coverage upon online registration, extending to the evaporator coil through their separate coil warranty program. This standard coverage protects against manufacturing defects but excludes wear items, refrigerant, and labor. Registration is required, so buyers must complete that step within 30 days to lock in the full term.
Specifications
| SKU | LS38783830 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 60,000 |
| Heating BTU | 100,000 |
| Refrigerant | R410A or R22 |
| Electrical | 120 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 75 |
| Weight (in lbs) | 30.000000 |
| Feature | Spec |
| Energy Star | No |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 7/8" |
| Max Breaker Size | 50 amps |
| Min. Breaker Size | 32.8 amps |
| Tonnage | 5 Ton |
| Height | 30" |
| Width | 21" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | High Efficiency Multi-Speed |
| Maximum CFM | 2000 |
| Configuration | Upflow / Downflow |
| Burner Stages | Two |
| Fuel Type | Gas |
| Liquid Line | 3/8" |
| Suction Line | 7/8" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/8" |
| Length | 30 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.