Review
The ACiQ 5-ton packaged heat pump and furnace combination represents the practical middle ground in residential HVAC equipment. Positioned below premium brands like Carrier and Lennox but above bottom-tier units, this system targets contractors and homeowners seeking reliable cooling and heating without premium pricing. The R454B refrigerant formulation reflects current environmental standards, though supply chain and technician familiarity varies by region.
Cooling performance delivers 57,000 BTU at 14 SEER efficiency, meeting modern baseline standards. Heating provides 58,000 BTU at 80% AFUE using a single-stage burner, adequate for moderate climates but not optimal for extreme cold regions. The multi-speed PSC blower maxes at 2,000 CFM, supporting 30-inch height in upflow or downflow configurations. At 77 dB, noise levels run noticeably higher than inverter-driven competitors, something apartment-adjacent installations should consider.
Pros & Cons
Pros
- 14 SEER cooling efficiency meets current standards and qualifies for some utility rebates in most regions
- 5-ton capacity handles typical single-family homes up to 2,500 square feet effectively
- 80% AFUE gas furnace provides acceptable heating performance for most climates
- Single-stage compressor and burner design means fewer components to fail long-term
- Multi-speed PSC blower motor at 2,000 CFM max airflow supports flexible ductwork configurations
- 10-year warranty with online registration covers major components adequately
Cons
- Cooling output of 57,000 BTU and heating output of 58,000 BTU are slightly undersized compared to stated 5-ton rating, requiring careful load calculation
- R454B refrigerant is newer with fewer qualified technicians available in some service areas
- 77 dB noise level runs louder than high-efficiency competitors, noticeable during operation
- Single-stage operation means the system runs full capacity or off, reducing part-load efficiency in mild weather
- No Energy Star certification indicates it misses higher efficiency thresholds available at similar price points
- Spec sheet discrepancy: product name says R410A but specs list R454B refrigerant
Who Should Buy
Best For
Budget-conscious homeowners replacing 15+ year old systems who value installation simplicity and want mid-tier efficiency without premium costs. Contractors installing in price-sensitive markets will appreciate straightforward serviceability and standard refrigerant connections.
Consider Alternatives If
Skip this if you need cutting-edge efficiency ratings (16 SEER+), live in extremely hot climates requiring oversized cooling capacity, or want variable-stage compressors that modulate output for quieter, more efficient part-load operation.
Installation
Installation requires standard 208/230V single-phase 60Hz service with 34.6-60 amp breaker sizing flexibility. The compact 21-inch width and 30-inch height fit most mechanical closets. Metal flue venting required at top exit point. Sweat-type valve connections use standard 3/8-inch and 7/8-inch lines with 50-foot maximum suction line length and 1/2-inch insulation thickness. Setup is straightforward for experienced technicians.
Warranty & Reliability
Ten-year parts warranty on compressor, heat exchanger, and covered components requires online registration to activate. Coverage is comprehensive for major failures but excludes wear items like capacitors and contactors. Registration is simple but mandatory, so don't skip it at installation. This warranty period is competitive for equipment at this price tier.
Specifications
| SKU | ACIQ-60-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 57,000 |
| Heating BTU | 58,000 |
| Refrigerant | R454B |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 77 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | Multi Speed - PSC |
| Maximum CFM | 2000 |
| Configuration | Upflow / Downflow |
| Flue Location | Top |
| Burner Stages | Single |
| Fuel Type | Gas |
| Height | 30" |
| Width | 21" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Replaces | GSZ140611 |
| Energy Star | No |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 7/8" |
| Max Breaker Size | 60 amps |
| Min. Breaker Size | 34.6 amps |
| Tonnage | 5 Ton |
| Valve Type | Sweat |
| Liquid Line | 3/8" |
| Suction Line | 1 1/8" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 1/2" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.