Review
The ACiQ 5-ton upflow system represents a practical middle-market solution for contractors balancing cost with performance. This hybrid approach combines a 92% AFUE gas furnace with a 14 SEER heat pump condenser in one package, eliminating complicated dual-unit coordination. Goodman's ACiQ line has gained contractor trust over the past decade as a no-nonsense alternative to premium brands, and this unit maintains that reputation with straightforward single-stage compressor design and proven scroll technology.
Performance specs hold up well for the price point. The furnace delivers 58,000 BTU heating output with 92% AFUE efficiency, meaning 92 cents of every fuel dollar converts to usable heat. The heat pump side produces 57,000 BTU cooling at 14 SEER, adequate for 5-ton applications in mixed climates. The multi-speed blower supports maximum 1600 CFM, ensuring even distribution across ductwork. Operating on 208/230V single-phase power with a 60-amp breaker requirement, electrical integration is straightforward for most residential installations.
Pros & Cons
Pros
- 92% AFUE furnace efficiency with single-stage burner for predictable fuel consumption
- 14 SEER cooling efficiency at 5 tons, delivering 57,000 BTU output
- Multi-speed blower motor optimizes airflow between heating and cooling cycles
- R454B refrigerant aligns with current EPA regulations and future compliance
- 10-year warranty with online registration covers most failure scenarios
Cons
- Single-stage condenser limits part-load efficiency during mild weather cycling
- 77 dB noise level runs louder than some competitors, noticeable during operation
- No Energy Star certification despite respectable SEER and AFUE ratings
Who Should Buy
Best For
Contractors installing budget-conscious systems in ASHRAE zones 4-7 where heating and cooling loads are roughly balanced will appreciate this unit's straightforward engineering and proven ACiQ reliability. Homeowners replacing aging gas furnaces with heat pump systems should consider this as a practical middle ground between cost and efficiency.
Consider Alternatives If
Buyers in very cold climates needing primarily heating capacity should look at dedicated furnaces, and those seeking ultra-quiet operation or maximum efficiency ratings should explore variable-capacity alternatives.
Installation
This upflow configuration fits standard basement or utility closet spaces with its 30 inches tall, 21 inches wide and deep footprint. The plastic/PVC exhaust flue requirement simplifies venting compared to metal ductwork, reducing installation labor. Refrigerant lines require 3/8-inch liquid and 1 1/8-inch suction connections with 1/2-inch insulation, using sweat valve connections. Contractors should plan for 50 feet of pre-insulated lineset, which ACiQ provides ready-to-use.
Warranty & Reliability
The 10-year warranty requires online registration to activate full coverage. This period covers compressor failure, refrigerant leaks, and component defects under normal operation. Registration takes minutes through Goodman's website. Parts availability through HVAC wholesalers remains strong due to Goodman's national network, meaning warranty claims rarely exceed 48 hours for replacement components in most service areas.
Specifications
| SKU | ACIQ-60-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 57,000 |
| Heating BTU | 58,000 |
| Refrigerant | R454B |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 77 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Furnace Efficiency / AFUE | 92% |
| Blower Motor | Multi Speed |
| Maximum CFM | 1600 |
| Configuration | Upflow / Downflow |
| Flue Location | Right |
| Burner Stages | Single |
| Fuel Type | Gas |
| Height | 30" |
| Width | 21" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Replaces | GSZ140611 |
| Energy Star | No |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 7/8" |
| Max Breaker Size | 60 amps |
| Min. Breaker Size | 34.6 amps |
| Tonnage | 5 Ton |
| Valve Type | Sweat |
| Liquid Line | 3/8" |
| Suction Line | 1 1/8" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 1/2" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.