Independent Review · Updated June 2026

5 Ton 14 SEER 92% AFUE 100,000 BTU Goodman Gas Furnace and Air Conditioner System - Upflow

Solid mid-range 5-ton system with 92% AFUE and 14 SEER for budget-conscious homeowners

8.2
IndustrialRank Score
Efficiency
8.5
Reliability
7.8
Value
8.0
Installation
8.5
Warranty
8.0
5 Ton 14 SEER 92% AFUE 100,000 BTU Goodman Gas Furnace and Air Conditioner System - Upflow
Current Price
$0
Check Price at HVACDirect → Shop Now at HVACDirect
Authorized dealer · Full manufacturer warranty
// Bottom Line
This Goodman system delivers respectable efficiency at an accessible price point, making it ideal for homeowners replacing aging equipment on a moderate budget. It's particularly suited for mixed climates where heating and cooling demands are balanced.

Review

The Goodman 5-ton gas furnace and air conditioning system represents a practical middle ground in the residential HVAC market. At a competitive price point, this upflow configuration delivers adequate performance without premium pricing, making it attractive to budget-conscious homeowners and cost-conscious contractors. The system combines a 100,000 BTU furnace with a 60,000 BTU air conditioning capacity, engineered for residential comfort across mixed heating and cooling seasons.

Performance metrics are respectable across both heating and cooling. The furnace achieves 92% AFUE, surpassing the federal minimum of 90%, while the air conditioning side delivers 14 SEER cooling efficiency. A multi-speed blower motor allows 2,000 CFM maximum airflow with variable speed capability, reducing energy consumption during partial-load operation. The scroll compressor design is proven reliable across thousands of installations, though the single-stage burner limits modulation compared to two-stage alternatives.

Pros & Cons

Pros

  • 92% AFUE furnace efficiency exceeds minimum federal standards by a meaningful margin
  • 14 SEER cooling efficiency is competitive for mid-tier residential systems
  • Multi-speed blower motor optimizes comfort and reduces energy waste across varying loads
  • Compact 21x21x30 inch footprint fits tight installation spaces in basements or utility closets
  • PVC flue capability simplifies venting requirements compared to metal ductwork alternatives
  • 10-year warranty with online registration provides solid long-term protection

Cons

  • Single-stage burner and compressor mean less precise modulation compared to two-stage models
  • Not ENERGY STAR certified, which disqualifies buyers seeking maximum efficiency incentives
  • 75 dBA noise level is moderately loud, potentially noticeable in open-concept homes
  • R22 refrigerant option limits future serviceability as R410A becomes industry standard

Who Should Buy

Best For

Homeowners in moderate climates replacing 10-15 year old systems who prioritize upfront affordability over premium efficiency features. Contractors installing systems for rental properties or value-conscious customers will appreciate the straightforward single-stage design and solid warranty protection.

Consider Alternatives If

Buyers in extreme heating or cooling climates, those needing ENERGY STAR certification for tax credits, or homeowners expecting whisper-quiet operation should explore higher-tier models with variable capacity.

5 Ton 14 SEER 92% AFUE 100,000 BTU Goodman Gas Fur
$0
Buy at HVACDirect →

Installation

Installation is straightforward for certified HVAC technicians. The unit accepts both PVC and plastic exhaust venting, simplifying flue routing compared to metal alternatives. Electrical requirements are moderate at 208/230V single-phase 60Hz with a breaker range of 32.8 to 50 amps. The compact 30-inch height and 21-inch width fit standard utility closets, though technicians must verify adequate clearance for the flue location positioned on the right side.

Warranty & Reliability

Coverage extends 10 years from the date of online registration, protecting against manufacturing defects in both heating and cooling components. This is standard industry coverage for mid-tier residential systems. Goodman's warranty requires proper installation by licensed technicians and routine maintenance. Extended warranties are typically available through local HVAC dealers at point of purchase.

Specifications

SKULS38783830
Brand/ManufacturerOnline Supply
Cooling BTU60,000
Heating BTU100,000
RefrigerantR410A or R22
Electrical208 / 230 V. 1 Phase 60 Hz
Warranty10 Years with Online Registration
Decibel Level (dBA)75
Weight (in lbs)30.000000
FeatureSpec
Airflow DirectionUpflow/Horizontal
Exhaust Flue RequirementPlastic / PVC
Furnace Efficiency / AFUE92%
Blower MotorMulti Speed
Maximum CFM2000
ConfigurationUpflow / Downflow
Flue LocationRight
Burner StagesSingle
Fuel TypeGas
Height30"
Width21"
Depth21"
ResourcesCAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Energy StarNo
SEER1 (Efficiency)14
Condenser StagesSingle Stage
Compressor TypeScroll
Liquid Valve Size3/8"
Suction Valve Size7/8"
Max Breaker Size50 amps
Min. Breaker Size32.8 amps
Tonnage5 Ton
Liquid Line3/8"
Suction Line7/8"
StyleA-Coil
Suction Line Insulation Thickness3/8"
Length30 feet

Frequently Asked Questions

Is this system suitable for very cold climates? +
The 100,000 BTU furnace provides adequate heating for most moderate climates, but homes in severe cold regions may require auxiliary heat or backup resistance heating. Consult a local HVAC contractor to calculate heating load for your specific location before purchasing.
What's the difference between R410A and R22 refrigerant options? +
R410A is the modern standard with superior environmental properties and better efficiency potential. R22 is older and faces potential future restrictions. Specify R410A unless your existing system requires R22 compatibility and you're retrofitting.
Will this qualify for energy rebates or tax credits? +
No. The unit lacks ENERGY STAR certification, disqualifying it from most utility rebate programs. Homeowners seeking maximum incentives should consider higher-efficiency systems rated 15 SEER or above and 95% AFUE or higher.
How does single-stage compare to two-stage cooling and heating? +
Single-stage runs at full capacity or off, cycling more frequently. Two-stage operates at partial capacity most of the time, using less energy and improving comfort. This system costs less upfront but will have slightly higher operational costs over its lifetime.
Do I need a specific evaporator coil for this furnace? +
Yes. Goodman systems require matching evaporator coils for proper refrigerant flow and efficiency. Your installer will select the correct coil size and refrigerant type. Using mismatched components voids the warranty.

Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.