Review
This 5 ton Goodman system represents the practical middle ground in residential HVAC. The 97% AFUE furnace with 100,000 BTU heating capacity and 14 SEER air conditioner delivering 60,000 BTU cooling address both winter and summer comfort. Energy Star certification signals real efficiency gains over baseline equipment. The upflow configuration and compact 30x21x21 inch footprint make it a straightforward replacement for most residential installations without major structural changes.
The furnace's modulating burner stages adjust heat output continuously rather than simple on-off cycling, reducing temperature swings and improving comfort. The variable speed ECM blower motor running up to 2000 CFM optimizes air distribution at multiple comfort levels. However, the air conditioner uses a single stage scroll compressor that cycles rather than modulates, meaning cooling efficiency drops when outdoor temperatures spike. The R454B refrigerant meets current EPA standards and offers environmental benefits over older R410A equipment.
Pros & Cons
Pros
- 97% AFUE furnace efficiency significantly reduces heating costs compared to 80-90% units, saving contractors' customers money immediately
- Modulating burner stages provide consistent comfort by adjusting heat output rather than cycling on and off
- Variable speed ECM blower motor adapts to demand, improving air distribution and reducing energy waste
- 14 SEER cooling efficiency earns Energy Star certification, qualifying many installations for utility rebates
- R454B refrigerant is EPA-approved low-GWP option with forward compatibility
- Compact 30x21x21 inch dimensions fit standard return plenums without major ductwork modifications
- PVC/plastic flue compatibility simplifies venting in many residential installations
Cons
- 14 SEER is mid-tier efficiency, not high-efficiency, so peak cooling performance lags 16+ SEER units in extreme heat
- Single stage compressor in the air conditioner lacks variable capacity, so cooling cycles rather than modulates like the furnace
- Limited to 50 amp maximum breaker size, restricting future upgrades or paired equipment options
- No two-stage or variable compressor option for those prioritizing quieter operation or superior part-load efficiency
Who Should Buy
Best For
Homeowners in moderate climates replacing 15 to 20 year old systems will see the strongest ROI, especially those eligible for utility rebates on the Energy Star rated unit. Contractors serving residential markets value this system for its balance of efficiency, reliability, and straightforward upflow installation in basements and attics.
Consider Alternatives If
Skip this if you need ultra-high efficiency cooling in hot climates, require two-stage or variable capacity compressors, or plan heavy electrical add-ons that demand larger breaker capacity.
Installation
Upflow installation suits basements and utility closets where return air flows upward through the unit. Plastic PVC flue venting simplifies roof or wall penetrations compared to metal ductwork. The 115V single phase 60Hz electrical requirement needs 32.8 to 50 amp dedicated breaker service. Standard 3/8 inch and 7/8 inch line sets with 3/8 inch suction insulation connect to most existing indoor coils without modification. Plan 2 to 4 hours for qualified technician installation.
Warranty & Reliability
ACiQ backs this system with 10 years of parts coverage, extending to the Goodman evaporator coil. Online registration activates full protection, so verify completion with the installer. Compared to 5 year baseline coverage on budget models, the decade coverage reflects confidence in component longevity and provides meaningful peace of mind for homeowners.
Specifications
| SKU | ACIQ-60-EHPD-UPG |
| Brand/Manufacturer | ACiQ |
| Cooling BTU | 60,000 |
| Heating BTU | 100,000 |
| Refrigerant | R454B |
| Electrical | 115 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 75 |
| Weight (in lbs) | 120.000000 |
| Feature | Spec |
| Energy Star | Yes |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 7/8" |
| Max Breaker Size | 50 amps |
| Min. Breaker Size | 32.8 amps |
| Tonnage | 5 Ton |
| Height | 30" |
| Width | 21" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| AHRI Certificate Number | 7424267 |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Product Features | Rebate Available |
| Furnace Efficiency / AFUE | 97% |
| Blower Motor | Variable Speed - ECM |
| Maximum CFM | 2000 |
| Configuration | Upflow / Downflow |
| Flue Location | Right |
| Burner Stages | Modulating |
| Fuel Type | Propane, Natural Gas |
| Liquid Line | 3/8" |
| Suction Line | 7/8" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/8" |
| Length | 30 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.