Review
The Goodman 5-ton CAPF system positions itself as the practical choice for budget-aware homeowners and small contractors. At $2,071, it undercuts premium brands while pairing an 80,000 BTU furnace with 60,000 BTU cooling capacity in a compact 30-inch upflow configuration. The system ships with AHRI certification (204633307) and handles both natural gas and propane fuel, making it adaptable to most residential applications.
Performance specs show an 80% AFUE furnace with dual-stage burners and a variable-speed blower capable of 2,000 CFM maximum output. Cooling delivers 16 SEER efficiency via a scroll compressor with two-stage condenser operation and A-coil design. Electrical requirements sit at 208/230V single-phase, needing a 37.2 to 60-amp breaker. The system weighs 50 pounds and operates at 75 dBA, maintaining reasonable noise levels for residential spaces.
Pros & Cons
Pros
- 80% AFUE furnace with two-stage burners delivers consistent heat output across 80,000 BTU capacity, matching most home heating needs
- 16 SEER cooling efficiency earns Energy Star rating, reducing summer electricity costs versus baseline models
- Variable-speed blower motor adapts airflow up to 2,000 CFM, improving comfort and reducing runtime waste
- 5-ton capacity handles typical single-story homes and moderate climate zones without oversizing issues
- 10-year warranty with online registration covers compressor and components, providing meaningful protection
- Two-stage condenser keeps noise at 75 dBA, acceptable for most residential installations
Cons
- 80% AFUE is mid-range, not high-efficiency like 95%+ modulating furnaces that reduce monthly heating bills further
- 16 SEER rating (not SEER2) uses older efficiency metric, actual performance may rate lower under current testing standards
- Requires metal exhaust flue, adding installation cost if existing ductwork doesn't accommodate
- 75 dBA noise level is audible during operation, potentially noticeable in quiet bedroom spaces
Who Should Buy
Best For
Homeowners replacing 15+ year old split systems or basic furnace-only setups will see real utility bill improvements from this unit's efficiency gains. Budget-conscious buyers in moderate climates (not extreme cold) get balanced performance at roughly $2,000, avoiding premium pricing while upgrading from age-worn equipment.
Consider Alternatives If
Skip this if you need 95%+ AFUE heating for harsh winters or seek quieter operation below 70 dBA, as higher-tier models outperform here.
Installation
Installation requires metal exhaust flue (not flexible ducting), which adds cost if existing venting doesn't match. The upflow/horizontal configuration suits basements and closet placement. Variable-speed blower operation demands proper ductwork balancing and thermostat compatibility. Professional installation is strongly recommended due to refrigerant handling (R410A or R22), gas line sizing, and electrical work required.
Warranty & Reliability
Goodman provides 10 years parts and compressor coverage when you register online, a solid safety net against major failures. This covers the scroll compressor and heat exchanger defects but excludes wear items like bearings. Evaporator coil carries separate coverage. Registration takes five minutes and protects your investment during peak efficiency years.
Specifications
| SKU | CAPF4961D6 |
| Brand/Manufacturer | Goodman |
| Cooling BTU | 60,000 |
| Heating BTU | 80,000 |
| Refrigerant | R410A or R22 |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 75 |
| Weight (in lbs) | 50.000000 |
| Feature | Spec |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| AHRI Certificate Number | 204633307 |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | Variable Speed |
| Maximum CFM | 2000 |
| Configuration | Upflow / Downflow |
| Burner Stages | Two |
| Fuel Type | Propane, Natural Gas |
| Height | 30" |
| Width | 24.5" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Energy Star | Yes |
| SEER1 (Efficiency) | 16 |
| Condenser Stages | Two Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 7/8" |
| Max Breaker Size | 60 amps |
| Min. Breaker Size | 37.2 amps |
| Tonnage | 5 Ton |
| Valve Type | Sweat |
| Liquid Line | 3/8" |
| Suction Line | 7/8" |
| Style | A-Coil |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.