Review
Goodman's 5-ton split system positions itself as a practical middle ground in the residential HVAC market. This upflow A-coil configuration handles both heating and cooling, making it suitable for 2,000 to 3,500 square foot homes. The system carries a strong reputation for durability among contractors and includes Goodman's standard 10-year warranty with online registration. At $2,053, the price point attracts homeowners seeking replacement equipment without premium features.
The cooling side delivers 60,000 BTU across a two-stage compressor with 16 SEER efficiency, which translates to roughly 10-15% lower cooling costs versus 14 SEER baseline units. The heating side produces 80,000 BTU through a two-stage burner operating at 80% AFUE using either natural gas or propane. Variable-speed blower technology maintains up to 2,000 CFM while keeping noise levels at 75 dB, making it quieter than single-stage units. R410A refrigerant is industry standard and widely supported by service technicians.
Pros & Cons
Pros
- 16 SEER cooling efficiency exceeds the 15 SEER rating, providing measurable energy savings over 13-14 SEER competitors
- Two-stage burner and two-stage compressor reduce energy waste and improve comfort during partial-load conditions
- Variable-speed blower motor runs quietly at 75 dB and delivers up to 2,000 CFM, matching diverse ductwork configurations
- 80% AFUE furnace is Energy Star certified and qualifies for utility rebates in many regions
- Upflow/horizontal A-coil design fits tight spaces, making it ideal for retrofits in closets or attics
Cons
- 80% AFUE is mid-range, not high-efficiency, so fuel savings take 8-10 years to recoup versus 95%+ units
- 16 SEER is good but not cutting-edge, whereas newer units reach 18-20 SEER with better grid decoupling
- Metal exhaust flue requirement adds installation cost compared to units supporting plastic venting
Who Should Buy
Best For
Homeowners replacing 15-year-old split systems or upgrading from single-stage equipment will see immediate comfort and efficiency gains. This is the right choice for those who value reliability and price over premium efficiency features.
Consider Alternatives If
High-efficiency seekers in heating-dominant climates should explore 95%+ AFUE modulating furnaces, and those targeting zero-energy homes should consider variable-capacity units rated 18+ SEER.
Installation
This system requires 208/230V single-phase 60Hz power with breaker sizing between 37.2 and 60 amps. A metal exhaust flue is mandatory for the furnace, which adds cost if existing venting won't accommodate it. Liquid and suction line sizes are 3/8 inch and 7/8 inch respectively. Most experienced HVAC installers complete this upflow configuration in 4-6 hours, though ductwork modifications may extend timelines.
Warranty & Reliability
Goodman includes a full 10-year parts warranty when you register online within 30 days of installation. This covers both the furnace and air conditioner compressor, offering genuine peace of mind against manufacturing defects. Labor warranty terms vary by installer, so confirm coverage details before signing the contract.
Specifications
| SKU | TX5N4 |
| Brand/Manufacturer | Goodman |
| Cooling BTU | 60,000 |
| Heating BTU | 80,000 |
| Refrigerant | R410A |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 75 |
| Weight (in lbs) | 2.500000 |
| Feature | Spec |
| Configuration | Upflow/Horizontal |
| Liquid Line | 3/8" |
| Suction Line | 7/8" |
| Tonnage | 5 Ton |
| Style | A-Coil |
| Height | 38.25" |
| Width | 35.5" |
| Depth | 35.5" |
| Resources | Goodman Specifications You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| AHRI Certificate Number | 204633302 |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | Variable Speed |
| Maximum CFM | 2000 |
| Burner Stages | Two |
| Fuel Type | Propane, Natural Gas |
| Energy Star | Yes |
| SEER1 (Efficiency) | 16 |
| Condenser Stages | Two Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 7/8" |
| Max Breaker Size | 60 amps |
| Min. Breaker Size | 37.2 amps |
| Valve Type | Sweat |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.