Review
The Goodman 5-ton horizontal system occupies a practical middle ground in the HVAC market. It combines proven furnace technology with solid cooling capacity in a configuration designed for tight spaces where traditional vertical units won't fit. At 77 pounds and measuring 24.5 inches tall, 26 inches wide, and 21.125 inches deep, it fits easily into most attic and crawlspace installations. This model targets cost-conscious contractors and homeowners seeking efficiency improvements without enterprise-level pricing.
Performance specifications tell a compelling story for heating-dominant regions. The furnace delivers 120,000 BTU at 97% AFUE, converting nearly every dollar of fuel into usable heat rather than wasting it up the chimney. Cooling output reaches 57,000 BTU with 16 SEER efficiency and two-stage compressor operation. The variable-speed ECM blower adjusts to 2,000 CFM maximum, matching output to actual heating and cooling demand rather than running at constant speed. These features meaningfully reduce energy consumption compared to older 90-93% AFUE single-stage equipment.
Pros & Cons
Pros
- 97% AFUE furnace efficiency reduces heating costs significantly compared to 90-93% models
- Modulating burner stages adjust heating output for better comfort and lower utility bills
- Variable-speed ECM blower optimizes airflow while reducing fan energy consumption
- Two-stage condenser with scroll compressor provides reliable cooling at 57,000 BTU for 5-ton capacity
- PVC exhaust flue compatibility simplifies venting in modern construction
- 10-year warranty with online registration covers both heating and cooling components
Cons
- Not Energy Star certified despite high efficiency ratings
- 16 SEER cooling rating lags behind newer 18-20 SEER competitors released in recent years
- 74 dB noise level is moderately loud during operation, noticeable in some installations
- Requires 36.7 to 60-amp breaker sizing, limiting some older electrical panel placements
Who Should Buy
Best For
Contractors installing horizontal systems in attics or compact crawlspaces will appreciate the proven Goodman reliability and straightforward PVC venting. Homeowners in northern climates who heat with natural gas or propane and want genuine efficiency gains without premium pricing should seriously consider this unit.
Consider Alternatives If
Skip this if you need maximum cooling efficiency above 17 SEER, prefer Energy Star certification, or have electrical service limitations below 36.7 amps.
Installation
Horizontal mounting simplifies installation in confined spaces where vertical clearance doesn't exist. The right-side flue outlet works with standard PVC or plastic venting, avoiding expensive metallic ductwork costs. Refrigerant connections use 3/8-inch liquid lines and 7/8-inch suction lines with sweat valves, allowing experienced technicians to integrate with existing copper linework. Electrical requirements demand 208/230V single-phase 60Hz service with breaker sizing between 36.7 and 60 amps.
Warranty & Reliability
Goodman backs this system with 10 years of parts and labor coverage when registered online, a solid commitment matching most mid-tier competitors. The warranty protects against compressor failure, heat exchanger defects, and blower motor problems. Online registration takes minutes and activates coverage immediately. Ten years provides genuine protection for residential applications, though commercial users should verify specific terms with the dealer.
Specifications
| SKU | CHPF4860D6 |
| Brand/Manufacturer | Goodman |
| Cooling BTU | 57,000 |
| Heating BTU | 120,000 |
| Refrigerant | R410A or R22 |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 74 |
| Weight (in lbs) | 77.000000 |
| Feature | Spec |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| AHRI Certificate Number | 7424268 |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Plastic / PVC |
| Product Features | Rebate Available |
| Furnace Efficiency / AFUE | 97% |
| Blower Motor | Variable Speed - ECM |
| Maximum CFM | 2000 |
| Configuration | Horizontal |
| Flue Location | Right |
| Energy Star | No |
| Burner Stages | Modulating |
| Fuel Type | Propane, Natural Gas |
| Height | 24.5" |
| Width | 26" |
| Depth | 21.125" |
| Resources | CHPF Installation Manual CHPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| SEER1 (Efficiency) | 18 |
| Condenser Stages | Two Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 7/8" |
| Max Breaker Size | 60 amps |
| Min. Breaker Size | 36.7 amps |
| Tonnage | 5 Ton |
| Valve Type | Sweat |
| Liquid Line | 3/8" |
| Suction Line | 7/8" |
| Style | A-Coil |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.