Review
The Goodman 1.5-ton gas furnace and heat pump system arrives as a no-frills alternative in a market dominated by premium-priced combos. At $1909, this upflow unit targets budget-conscious homeowners and contractors managing tight customer budgets. Built on Goodman's reliability reputation, the system handles both heating and cooling duties with modest efficiency ratings that meet baseline Energy Star standards without unnecessary cost add-ons.
Performance specs reveal solid, unremarkable capabilities. The 80% AFUE gas furnace delivers 18,000 BTU heating output using a two-stage burner, while the 14 SEER cooling half produces matching 18,000 BTU capacity through a rotary compressor. Maximum airflow reaches 1600 CFM with a variable-speed blower motor that adjusts to part-load demands. Electrical requirements stay modest at 208/230V single-phase, fitting most residential installations without panel upgrades.
Pros & Cons
Pros
- Aggressive $1909 price point undercuts comparable 1.5-ton systems by 15-20%
- 14 SEER rating meets Energy Star standards for potential utility rebates and tax credits
- Variable-speed blower motor optimizes comfort and reduces cycling losses
- Dual-fuel capability handles both natural gas and propane without unit swaps
- Two-stage burner provides better part-load efficiency than single-stage alternatives
Cons
- 80% AFUE is baseline efficiency, not the 90%+ available in premium gas furnaces
- 3-ton condenser paired with 1.5-ton evaporator creates sizing mismatch that may reduce actual SEER performance
- Single-stage cooling limits modulation compared to two-stage competitors
Who Should Buy
Best For
Homeowners in moderate climates replacing 10+ year old equipment who prioritize upfront cost savings over premium efficiency, and HVAC contractors stocking affordable replacement units for price-sensitive residential customers.
Consider Alternatives If
Buyers in high-utility-cost regions, those seeking maximum cooling efficiency, or customers who plan to stay in their homes 15+ years should evaluate higher-SEER options despite greater initial investment.
Installation
Installation complexity sits at moderate level. The upflow configuration requires 26 inches of height clearance, fitting standard closets and basements. Metal exhaust flue piping is mandatory for the furnace section. Refrigerant lines come pre-sized with 3/8-inch liquid and 3/4-inch suction lines, plus 50 feet of insulated suction line included. Contractor labor typically runs 4-6 hours for experienced teams.
Warranty & Reliability
Goodman includes a 10-year parts warranty upon online registration, covering compressor, heat exchanger, and coil failures. This standard-in-class protection costs nothing to activate and provides reasonable peace of mind, though some competitors offer 12-year coverage. Registration is mandatory to activate coverage, so follow documentation carefully.
Specifications
| SKU | LS38343850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 18000 |
| Heating BTU | 18000 |
| Refrigerant | R410A or R22 |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 70 |
| Weight (in lbs) | 22.000000 |
| Feature | Spec |
| AHRI Certificate Number | 204633301 |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | Variable Speed |
| Maximum CFM | 1600 |
| Configuration | Upflow / Downflow |
| Burner Stages | Two |
| Fuel Type | Propane, Natural Gas |
| Height | 26" |
| Width | 17.5" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| Replaces | GSZ140191 |
| Energy Star | Yes |
| SEER1 (Efficiency) | 14 |
| Condenser Stages | Single Stage |
| Compressor Type | Rotary |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 20 amps |
| Min. Breaker Size | 11.8 amps |
| Tonnage | 3 Ton |
| Valve Type | Sweat |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.