2 Ton 13.4 SEER2 60,000 BTU Goodman Dual Fuel Heat Pump and Gas Package Unit Review 2026

// Bottom Line

This unit works best for homeowners in moderate climates who want reliable heating and cooling without premium pricing. The 13.4 SEER2 rating and 8.0 HSPF balance seasonal efficiency with practical upfront costs around $4,710.

Review

The Goodman GPDM32406041 is a straightforward 2-ton dual-fuel package unit designed for homeowners and contractors seeking a middle ground between budget and premium equipment. It combines electric heat pump operation during mild weather with a natural gas furnace for heavy heating loads. This SKU replaces the older GPD1424060M41 model and represents Goodman's accessible entry point into modern SEER2-rated equipment. At $4,710, it positions itself below variable-capacity systems while maintaining manufacturer backing and field-proven architecture.

Performance specifications reflect a unit built for consistent output rather than peak efficiency. The cooling side delivers 23,800 BTU at 13.4 SEER2, meeting current efficiency standards for 2-ton equipment. Heating reaches 60,000 BTU total (23,800 from the compressor plus gas burner capacity) with an 8.0 HSPF rating, adequate for moderate winter demands. The 5-speed EEM blower motor tops at 850 CFM, and the scroll compressor operates at 755 RPM using R410A refrigerant. Single-stage cooling means the unit runs at full capacity or off, without intermediate modulation.

Pros & Cons

Pros

13.4 SEER2 cooling efficiency meets current Energy Star standards without exotic refrigerants
8.0 HSPF heating rating handles shoulder seasons effectively with dual-fuel flexibility
Pre-charged with 120 oz R410A refrigerant reduces installation time and field charging errors
Two-stage gas burner with low NOx emissions adds operational flexibility and environmental compliance
5-speed EEM blower motor allows technicians to match CFM output to actual ductwork needs

Cons

Single-stage cooling compressor won't modulate capacity on mild days, reducing part-load efficiency versus variable models
76 dB noise level is moderately loud, potentially noticeable during outdoor operation in quiet neighborhoods
Controller sold separately adds hidden cost to total installation expense

Who Should Buy

Best For

Homeowners in mixed climates with existing ductwork who need dependable heating and cooling without paying premium prices. Contractors installing replacement systems for price-conscious customers who want good efficiency and lower risk.

Consider Alternatives If

Anyone in very cold climates requiring constant heating (HSPF 8.0 is adequate but not exceptional), or those wanting ultra-quiet operation below 70 dB.

2 Ton 13.4 SEER2 60,000 BTU Goodman Dual Fuel Heat

$4710

Buy at HVACDirect →

Installation

Installation is straightforward for experienced technicians. The unit arrives pre-charged with 120 oz of R410A, eliminating field charging for most residential applications. Electrical requirements are modest, 208/230V single-phase at 25-30 amp breaker range. The downflow/horizontal configuration fits most closet or basement installations. Dimensions of 47 inches wide, 51 inches deep, and 34.5 inches tall require basic clearance planning. Note that you'll purchase the thermostat separately, adding to project scope.

Warranty & Reliability

Goodman provides 10 years of parts coverage when you register the unit online within 60 days of installation. This is standard industry practice for mid-tier equipment and provides meaningful protection against compressor or heat exchanger failure. Labor is not covered. Online registration is straightforward but mandatory for the warranty to activate, so document that serial number.

Specifications

SKU	GPDM32406041
Brand/Manufacturer	Goodman
Cooling BTU	23,800 BTU
Heating BTU	60,000 BTU
Refrigerant	R410A
Electrical	208 / 230 V. 1 Phase 60 Hz
Warranty	10 Years with Online Registration
Decibel Level (dBA)	76 dB
Weight (in lbs)	440.000000
Feature	Spec
Refrigerant Charge	120 Oz
AHRI Certificate Number	209319576
Replaces	GPD1424060M41
Controller	Not Included
Additional Information	Pre-Charged for Easy Installation
Furnace Efficiency / AFUE	80%
Blower Motor	5 Speed EEM
Drive Type	Direct
Maximum CFM	850
Motor RPM	755
Horsepower	1/2
Configuration	Downflow/Horizontal
HSPF	8.0
SEER2 (Efficiency)	13.4
Condenser Stages	Single Stage
Compressor Type	Scroll
Max Breaker Size	30 Amps
Min. Breaker Size	25 Amps
Tonnage	2 Ton
Low NOx	Low NOx
Burner Stages	Two
Fuel Type	Natural Gas
Certification	Standard
Height	34 1/2"
Width	47"
Depth	51"
Location	Outdoor
Resources	GPDM3 Installation Manual GPDM3 Specifications Sheet GPDM3 Replacement Parts Manual GPDM3 Service Manual Goodman Packaged Unit Warranty You will need Adobe® Acrobat® Reader to view PDF documents.
Safety Information	PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.

Frequently Asked Questions

How does the 13.4 SEER2 rating compare to newer units? +

13.4 SEER2 is right at the 2024 Energy Star threshold for northern climates and above minimum federal requirements. It's not exceptional, but respectable for a single-stage unit. Variable-capacity models reach 16-18 SEER2 at higher prices. For most homeowners, 13.4 delivers reasonable energy bills without premium investment.

Can this unit handle very cold winters? +

The 8.0 HSPF is adequate for mild-to-moderate climates but not ideal for regions below 5,000 heating degree days. In harsh winters, the gas furnace will run frequently, offsetting heat pump gains. For Minnesota or Maine, consider higher HSPF models or auxiliary heating strategies.

Is this pre-charged unit truly ready to install? +

Yes, the 120 oz R410A charge means no field refrigerant handling on standard residential installations. Your technician still needs to check liquid and suction line pressures after startup and add small amounts if needed, but bulk charging is eliminated, reducing contamination risk.

Why is a controller sold separately? +

Goodman packages the heating and cooling unit without a thermostat to let customers choose communicating, basic, or WiFi-enabled models. This saves cost if you're upgrading an existing system with a compatible stat, but adds expense for new installations. Budget $150-400 depending on features.

What's included in the 10-year warranty? +

Parts only, not labor. Compressor, heat exchanger, coils, and scroll mechanism are covered. You must register online within 60 days. Refrigerant is typically not covered after the first year unless there's a manufacturing defect.

Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.