Review
The Goodman 2-ton heat pump and gas furnace combination represents a practical middle ground for homeowners unwilling to spend premium dollars on HVAC replacement. Manufactured by Goodman, a brand with decades of contractor trust, this upflow-configured system handles both heating via natural gas or propane and cooling via R410A refrigerant. At $1909 before any available rebates, it undercuts many competitors while maintaining Energy Star certification, making it genuinely competitive in the budget-to-mid-range segment.
Performance metrics tell a straightforward story. The condenser unit delivers 24,000 BTU of cooling capacity with a 16 SEER rating, meaning it converts 16 BTUs of heat removal for every watt consumed, which exceeds the minimum 14 SEER threshold significantly. The furnace component produces 60,000 BTU of heating output at 80% AFUE efficiency, converting four-fifths of fuel energy to usable heat. The two-stage compressor and two-stage burner design allow the system to run at reduced capacity during mild weather, reducing short-cycling and improving part-load efficiency where equipment operates most of the year.
Pros & Cons
Pros
- 16 SEER cooling efficiency exceeds most mid-range competitors, reducing summer energy bills measurably
- Two-stage compressor and two-stage burner allow modulated heating and cooling for better comfort control
- Variable-speed blower motor adjusts airflow from 0 to 1600 CFM, improving dehumidification and comfort
- 80% AFUE furnace component meets modern heating standards without requiring premium condensing technology
- Priced at $1909, significantly undercuts comparable dual-stage systems from major retailers
- Energy Star certification confirms third-party verification of efficiency claims
Cons
- 80% AFUE furnace is standard efficiency, not high-efficiency, limiting winter savings potential versus 95%+ models
- 3-ton condenser paired with nominal 2-ton rating creates sizing ambiguity that requires careful AHRI verification
- 72 dB noise level runs louder than premium units, potentially noticeable during peak cooling cycles
- Limited warranty scope at 10 years standard, with online registration required to activate coverage
Who Should Buy
Best For
Homeowners in mild-to-moderate climates who prioritize upfront cost savings over maximum efficiency should consider this unit. It's particularly attractive for DIY-capable installers or those working with contractors who charge flat installation fees rather than equipment markups.
Consider Alternatives If
Buyers in harsh climates needing extreme cold performance or those who plan to stay in their homes 15+ years should investigate higher AFUE furnaces like 90%+ models despite higher initial cost.
Installation
Installation requires standard refrigerant line connections using 3/8 inch liquid and 3/4 inch suction lines, with 50 feet of suction line insulation provided at 3/4 inch thickness. The unit demands 120V single-phase 60Hz electrical service with a minimum breaker size of 15.8 amps and maximum of 25 amps. Metal exhaust flue is required for the furnace component. Upflow or horizontal configuration options make it adaptable to basements or utility closets.
Warranty & Reliability
Goodman provides a 10-year parts and labor warranty when you register the unit online after installation. This coverage is competitive at this price point, though it requires registration to activate. Comprehensive manufacturer documentation, including the CAPF installation manual and specifications sheet, supports installer troubleshooting. The A-coil design includes separate evaporator coil warranty coverage.
Specifications
| SKU | LS38343850 |
| Brand/Manufacturer | Online Supply |
| Cooling BTU | 24,000 |
| Heating BTU | 60,000 |
| Refrigerant | R410A or R22 |
| Electrical | 120 V. 1 Phase 60 Hz |
| Warranty | 10 Years with Online Registration |
| Decibel Level (dBA) | 72 |
| Weight (in lbs) | 22.000000 |
| Feature | Spec |
| Product Features | Rebate Available, Two Stage Condenser |
| Energy Star | Yes |
| SEER1 (Efficiency) | 16 |
| Condenser Stages | Two Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Max Breaker Size | 25 amps |
| Min. Breaker Size | 15.8 amps |
| Tonnage | 3 Ton |
| Valve Type | Sweat |
| Height | 26" |
| Width | 17.5" |
| Depth | 21" |
| Resources | CAPF Installation Manual CAPF Specifications Sheet Goodman Evaporator Coil Warranty You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here. |
| AHRI Certificate Number | 204633301 |
| Airflow Direction | Upflow/Horizontal |
| Exhaust Flue Requirement | Metal |
| Furnace Efficiency / AFUE | 80% |
| Blower Motor | Variable Speed |
| Maximum CFM | 1600 |
| Configuration | Upflow / Downflow |
| Burner Stages | Two |
| Fuel Type | Propane, Natural Gas |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Style | A-Coil |
| Suction Line Insulation Thickness | 3/4" |
| Length | 50 feet |
Frequently Asked Questions
Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.