Independent Review · Updated June 2026

36,000 BTU 19.2 SEER Mitsubishi Quad Zone Heat Pump System 9+9+9+9

High-efficiency quad-zone mini split with impressive 19.2 SEER for moderate cooling needs.

8.2
IndustrialRank Score
Efficiency
8.5
Reliability
7.8
Value
8.0
Installation
8.5
Warranty
8.0
36,000 BTU 19.2 SEER Mitsubishi Quad Zone Heat Pump System 9+9+9+9
Current Price
$0
Check Price at HVACDirect → Shop Now at HVACDirect
Authorized dealer · Full manufacturer warranty
// Bottom Line
This quad-zone system excels for contractors and homeowners upgrading four separate spaces with a focus on energy efficiency. The 9,000 BTU per zone capacity and 19.2 SEER rating make it ideal for moderate climate zones or secondary cooling applications where zone control matters.

Review

This Mitsubishi quad-zone heat pump system targets the growing market of zoned mini-split installations where contractors need precise room-by-room control without traditional ductwork. The four 9,000 BTU indoor units distribute from a single outdoor compressor, each operating independently via wireless controller. At 36,000 BTU combined capacity, it addresses light-to-moderate cooling loads in residential applications where traditional central systems prove inefficient or impossible to install.

Performance metrics reveal a genuinely efficient unit. The published 19.2 SEER rating (specs also reference SEER1 at 23) translates to measurable energy savings in cooling mode, supported by an EER of 15 and HSPF ratings of 12.5 to 11.2 for heating. Operating ranges span 14 to 115 degrees for cooling and 5 to 65 degrees for heating, covering most US climates except extreme cold regions. Noise levels range 19 to 43 decibels, meaning whisper-quiet operation on low fan speeds.

Pros & Cons

Pros

  • 19.2 SEER rating delivers exceptional cooling efficiency and lower operating costs
  • Quad-zone configuration allows independent temperature control in four rooms or areas
  • 12.5-11.2 HSPF provides strong heating performance down to 5 degrees outdoor temperature
  • Wall-mounted design requires minimal space and offers flexible room placement
  • Wireless controller included, eliminating additional control system expenses
  • Single-phase 208/230V electrical compatibility fits standard residential installations

Cons

  • 36,000 BTU total capacity (9,000 per zone) undersizes homes larger than 1,500 square feet
  • Spec sheet lists SEER1 as 23 but product name claims 19.2 SEER, creating rating confusion
  • EER of 15 is solid but lags premium competitors in high-temperature cooling performance

Who Should Buy

Best For

Contractors installing multi-room systems in new construction or retrofits where independent zone control prevents heated arguments between occupants. Homeowners in moderate climates seeking efficient cooling for four distinct spaces without central ducting.

Consider Alternatives If

Anyone needing more than 36,000 BTU total capacity or heating below 5 degrees should explore larger tonnage systems or alternative heating solutions.

36,000 BTU 19.2 SEER Mitsubishi Quad Zone Heat Pum
$0
Buy at HVACDirect →

Installation

Installation requires 208/230V single-phase power with a 30 to 40-amp breaker, standard for most homes. Refrigerant lines use 1/4-inch liquid and 3/8-inch suction sizing, with a 15-foot maximum length between outdoor and indoor units. Wall-mounted indoor units need 3-inch clearance from ceiling and 18-inch width, making kitchen and bedroom placement straightforward. Drain lines connect via 5/8-inch tubing, dehumidifying at 0.23 gallons per hour.

Warranty & Reliability

The five-year parts warranty covers compressor and all refrigerant circuit components, standard for Mitsubishi equipment. Labor warranty details aren't specified here, so verify with your installer about coverage extensions. This duration provides reasonable protection for a mid-priced system, though premium alternatives sometimes offer seven-year coverage.

Specifications

SKU87762
Brand/ManufacturerOnline Supply
Cooling BTU9,000 BTU
Heating BTU10,900 BTU
RefrigerantR410A
Electrical208/230v 1 Phase 60 Hz
BTU/Tonnage9,000 BTU/0.75 Ton
Mini Split TypeWall Mounted
Zone CompatibilityMulti Zone
Warranty5 Years Parts Warranty
Decibel Level (dBA)19-43
Weight (in lbs)5.000000
FeatureSpec
ControllerWireless Included
Additional InformationDrain: 5/8"
Maximum CFM109-406 CFM
CapacityDehumidification Rate: 0.23 gal/hr
Liquid Line1/4"
Suction Line3/8"
Operating ModeCooling, Heating
Height3"
Width18"
Depth38"
ResourcesSurge Protector Install Guide You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Energy StarNo
HSPF12.5-11.2
SEER1 (Efficiency)23
EER15
PhaseSingle Phase
Max Breaker Size40
Min. Breaker Size30
Tonnage3 Ton
Min/Max Outdoor Temp for Heating5°-65°
Min/Max Outdoor Temp for Cooling14°-115°
Length15'

Frequently Asked Questions

Will four 9,000 BTU zones cool my whole house? +
No, 36,000 BTU suits homes under 1,500 square feet or four separate rooms. A 40,000 to 60,000 BTU system makes sense for larger homes. Consider load calculations based on insulation, window count, and sun exposure before purchasing.
What electrical work is required for installation? +
You need 208/230V single-phase power with a dedicated 30 to 40-amp breaker. Most homes have available circuits, but older panels may require upgrade. A licensed electrician should verify capacity before installation begins.
How does 19.2 SEER compare to window units or central air? +
Window units typically rate 8 to 12 SEER, while central systems average 14 to 17 SEER. This mini-split's 19.2 SEER beats both options, especially when cooling only occupied zones rather than entire homes.
Can I add more zones to this system later? +
No, this fixed four-zone configuration uses a single outdoor unit sized for 36,000 BTU. Expanding requires a second complete system. Plan your zone layout carefully during initial design.
Does the five-year warranty cover everything? +
Five-year parts coverage protects compressor and refrigerant components. Labor warranty and coverage details vary by installer. Request a full warranty document before signing the installation contract.

Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.