42,000 BTU 19.7 SEER Mitsubishi Quad Zone Heat Pump System 9+9+9+24 Review 2026

// Bottom Line

This Mitsubishi quad zone system excels for homeowners needing independent temperature control across four rooms with excellent efficiency ratings. It's ideal for retrofits and new construction where zone flexibility matters more than single-unit simplicity.

Review

The Mitsubishi MSZ-GS24NA represents a solid mid-range option in the high-efficiency heat pump market. This 3.5 ton, quad zone unit targets contractors and homeowners seeking zone control without oversizing a single unit. Mitsubishi's reputation for reliability backs this model, which carries AHRI certification and integrates a wireless controller as standard. At 42,000 BTU total capacity across four zones, it's positioned for homes requiring flexible room-by-room climate management rather than whole-house solutions.

Performance metrics validate the efficiency claims. The unit delivers 19.7 SEER2 cooling efficiency and 10.3 HSPF heating efficiency, both strong for equipment in this class. Cooling capacity reaches 22,400 BTU with 361-701 CFM airflow, while heating pushes 27,600 BTU down to 5 degrees outdoor temperature. The 9.2 EER rating and dehumidification at 0.77 gal/hr indicate responsive moisture control. Sound levels range from 32-53 dB depending on mode, keeping noise reasonable for residential settings.

Pros & Cons

Pros

19.7 SEER2 efficiency rating delivers substantial operating cost savings over standard units
10.3 HSPF heating performance means effective operation down to 5 degrees outdoor temperature
Quad zone configuration (9+9+9+24) allows independent temperature management in separate spaces
Wireless controller included with wall-mounted indoor head keeps setup streamlined
Pre-charged for 98 feet of line set reduces field work and potential leak points
10-year warranty with online registration provides long-term peace of mind

Cons

24,000 BTU cooling capacity may require additional outdoor units for larger homes
27,600 BTU heating output doesn't match some competitor offerings in harsh climates
Single-phase 208/230V electrical requirement limits installation options in certain commercial settings

Who Should Buy

Best For

Contractors and homeowners upgrading 3-4 room homes or adding efficient zoning to specific areas. This system works best for moderate climates and properties where running multiple smaller zones makes more sense than one large compressor.

Consider Alternatives If

Anyone needing to heat or cool large open-concept spaces above 24,000 BTU, or properties requiring three-phase power without conversion infrastructure.

42,000 BTU 19.7 SEER Mitsubishi Quad Zone Heat Pum

Buy at HVACDirect →

Installation

Installation requires single-phase 208/230V power with breaker sizing between 32.5-40 amps. The unit comes pre-charged for 98 feet of refrigerant line, minimizing field charging work. Four zone setup demands proper ductless line routing to separate wall-mounted heads and careful electrical planning. Drain installation uses standard 5/8 inch line. Mitsubishi's documentation package includes detailed installation manuals, though professional HVAC installation is strongly recommended for optimal performance.

Warranty & Reliability

Mitsubishi backs this unit with a 10-year compressor and parts warranty upon online registration. This extended coverage is competitive and reflects manufacturer confidence in build quality. Registration is straightforward and required to activate the full term. Warranty excludes normal wear, refrigerant recharge, and damage from improper installation or maintenance.

Specifications

SKU	MSZ-GS24NA
Brand/Manufacturer	Mitsubishi
Cooling BTU	22,400 BTU
Heating BTU	27,600 BTU
Refrigerant	R410A
Electrical	208/230v 1 Phase 60 Hz
BTU/Tonnage	24,000 BTU/2 Ton
Mini Split Type	Wall Mounted
Zone Compatibility	Multi Zone
Warranty	10 Years with Online Registration
Decibel Level (dBA)	C: 34-53 & H: 32-52
Weight (in lbs)	37.000000
Feature	Spec
Controller	Wireless Included
Additional Information	Drain: 5/8"
Maximum CFM	C: 361-701 & H: 336-701
Capacity	Dehumidification Rate: 0.77 gal/hr
Liquid Line	1/4"
Suction Line	5/8"
Operating Mode	Cooling, Heating
Height	12-13/16"
Width	43-5/16"
Depth	9-3/8"
Resources	Submittal Service Manual Parts Manual Operation Manual Installation Manual Engineering Data You will need AdobeÂ® AcrobatÂ® Reader to view PDF documents.
Safety Information	PROPOSITION 65 WARNING This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Refrigerant Charge	Pre-Charged For: 98'
AHRI Certificate Number	209836185, 209836201, 209949003
Energy Star	No
HSPF	10.3
SEER2 (Efficiency)	19.7
EER	9.2
Phase	Single Phase
Max Breaker Size	40
Min. Breaker Size	32.5
Tonnage	3.5 Ton
Min/Max Outdoor Temp for Heating	5°-65°
Min/Max Outdoor Temp for Cooling	14°-115°

Frequently Asked Questions

Can I add more zones to this system later? +

The MSZ-GS24NA is designed as a quad zone unit with fixed capacity allocation (9+9+9+24). Adding zones would require purchasing an additional outdoor compressor unit and expanding the line set infrastructure. Consult with your installer about expansion compatibility before purchase.

What's the minimum outdoor temperature this heats down to? +

The system operates reliably for heating from 5 degrees to 65 degrees outdoor temperature. Below 5 degrees, heating capacity degrades significantly. Homes in cold climates may need supplemental heat or a different system type for peak winter months.

How does 19.7 SEER2 compare to standard units? +

SEER2 rating of 19.7 is well above the 13 SEER2 federal minimum and compares favorably to most mid-tier competitors. You'll see measurable energy bill reductions compared to 10-14 SEER2 units, typically recouping efficiency premiums within 5-7 years.

Is this better than a single large unit for my whole house? +

This quad zone system suits homes where independent temperature control justifies multiple heads. Single large units cost less upfront but offer no zone flexibility. Choose this if different rooms have different schedules or temperature preferences.

Does the 10-year warranty cover refrigerant leaks? +

The warranty covers manufacturing defects. Refrigerant leaks from proper installation are covered, but leaks from improper work or line damage are not. Always use certified technicians for installation and service.

Affiliate disclosure: IndustrialRank earns a commission on qualifying purchases at no extra cost to you. We only recommend products we have independently reviewed.